Filter
Top Products
5) THE USB PLAY INDICATION
When the USB is connected, the red light will illuminate
6) USB PROT
Connect any USB flash drive with mp3 or WMA file. Audio and the controls are communicated
through this port from the USB to the mixer.
7) PLAY/PAUSE BUTTON
This button plays and pauses music from the iPod or USB flash drive
8) PREVIOUS TRACK
Use this switch to re-start the track or to select the last track.
9) NEXT TRACK
Use this knob to select the next track.
10)GAIN ADJUSTMENT
Each channel has a gain adjustment which is used to level between sources. This is very
useful when working on MP3 files as they are often recorded at varying output levels.
11) HIGH FADER (CH1/CH2)
Adjust CH1&CH2 equalization for treble.
12) LOW FADER (CH1/CH2)
Adjust CH1&CH2 equalization for base.
13)MID FADER (CH1/CH2)
Adjust CH1&CH2 equalization for voice.
14) VOLUME (CH1/CH2)
Adjust the volume level for CH1&CH2.
15)MICROPHONE
Plug 1/4” microphone in here.
16) MIC GAIN
Adjust the level for microphone.
17) MIC TONE
Adjust the TONE for microphone.
18) CUE MIX
This knob selects what output is sent to the headphones.
19) CUE GAIN
Adjust the level of CUE. The CUE LEVEL adjust your headphone output's level.
20) HEADPHONE
Plug 1/4” microphone in here.