Filter
Top Products
Stereo Line Inputs let you connect
most high-lev
el audio sources, such as
CD players, tape deck, tuner or VCR.
MIC 2
LL
R
GND
L
R
L
R
L
R
L
R
L
R
L
R
Master Booth Rec
OUTPUT
Line 7 Line 6 Line 5Line 5 Phono 2
/Line 4
LN 4 PH 2 Line 3 Phono 1
/Line 2
LN 2 PH 1 Line 1
CH 4 CH 3 CH 2 CH 1
INPUT
FUSE F 500mA 250V
~AC
INPUT
VOLTAGE
Your PYLE PRO Series Performance Mixer
is a sophisticated control center, perfect for mixing sound from multiple playback sources such as
microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly
constructed for home or professional use. Wide range volume controls permit you to adjust sound levels
accurately to achieve just the right mix for playing through your speaker system or for recording.
Please read this manual thoroughly before you attempt to set up and use the mixer. It contains a
range of suggestions and instructions to insure safe usage. Set up and used properly, you can expect
years of trouble-free service from this product.
Features and Controls: PYD1100 Mixer
Pyle Pro Mixer Owner’s Manual – 1i – Pyle Pro Mixer Owner’s Manual
Owner’s Manual Table of Contents
Input/Output Features
Features and Controls: PYD 1100
Presetting Controls Before Use
Connecting the Mixer Inputs
Connecting the Mixer’s Outputs
to Amplifiers
to Recorders
to Booth Speakers
Using Headphones
Using the Mixer Controls
Turning On the Mixer
Monitoring (”Cueing”) Inputs
Mixing Inputs
Adding Equalization to the Mix
Using the MicrophoneTalkover Mode
Microphone Tone and Level Controls
Using the Crossfader
Troubleshooting
Care and Maintenance
Specifications
Warranty
i
1
2
4
5
6
7
8
9
Input/Output Features:
Ground Screw
for turntables
Dual Purpose Stereo Inputs for
using a turntable with a magnetic
cartridge OR a high lev
el input
source
MIC2 Microphone
connector
permits
you to connect a
balanced or
unbalanced low
impedance microphone
with 1/4” plug.
Input Select Switches – set these
switches based on what is plugged
into Phono1/Line2 and Phono2/Line4
input jacks
Output Jacks to connect the mixer to a
receiv
er or amplifier
Booth Output Jacks to connect the mixer
to a second receiv
er or amplifier powering
speakers in the DJ booth or in a remote
location
Record Output Jacks to connect the
mix
er to a tape deck for recording the
mixed program
Headphone Jack
Accepts headphones with
1/4” plug
Headphone Level Control
Headphone CUE/PGMControl Allows you to listen simultaneously
or separ
ately to the CUE material or the active program
Booth Level Control Lets
y
ou control the mixer’s
overall BOOTH volume level,
if you set up remote speakers
or DJ booth monitors
Master Level Control
Lets you control mixer’s
overall volume level
Crossfader Slider Control Allows you to smoothly switch between
the input sources to Channel 2 and Channel 3
MIC Talkover Allows you to lower the
lev
el of the input sources so you can talk
them using the DJ Mic
MIC1 Level Controls Lets you control the
MIC lev
els as they enter the mix
MIC1 Tone Controls
3-Band Equalizer Allows you to tailor the mixer output to suit your
taste or performance en
vironment. Each frequency range can be
cut or boost by up to 10dB.
Dual VU Meter Indicates the levels of Left and Right Master Channels
Channel CUE Switch Allows you to monitor the selected audio
input source and prepare it prior to mixing it in.
Channel Input Selector Lets you choose the input source to play
for each channel
MIC 1 Combo Input Jack For
connecting a balanced or unbalanced
low impedance microphone with XLR
-
type or 1/4” plug
Channel Level Slider Control