12 – Pyle Pro Mixer Owner’s Manual
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
• A copy of your sales receipt or other proof of purchase
• A brief letter, indicating the problem you are experiencing with the product
• Include in your letter your return address, daytime phone number and R.A. number
• Also include a check or money order for $20.00 for return
shipping, handling and insurance, or provide your Visa/MC number with expiration date.
Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty will
be considered void if the unit was tampered with, improperly serviced or
subject to misuse, neglect or accidental damage.
Limited Warranty
PYLE PRO MIXERS
warranty registration card
Thank you for purchasing this PYLE
product. To activate your
warranty, please mail this card
within 10 days.
Name
Address
City, State ZIP
Model No. Serial #
(if available)
Date of Purchase
Purchased at:
Music Products Store
Catalog Merchandiser
Sound Contractor/Installer Mail Order
Other
Please complete warranty card, detach and return
All PYLE PRO products are carefully constructed and tested before shipment.
Units purchased in the USA are warranted to be free of defects in material
and workmanship for two (2) years from the date of purchase. This warranty
is limited to the original retail purchaser of the mixer.
Should the unit fail due to factory defects in material or workmanship, your
unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return Hotline
at (718) 236-6948 to obtain a Return Authorization Number. This R.A. # must
appear on the outside of your package and on all paperwork relating to your
return.
When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid, to:
PYD1808/PYD2808
PYD3808
www.pyleaudio.com
PYD1808/2808/3808
Input Sensitivity/Impedance
Mic 1-2
Phono 1-2
Line 1-8
Output Level
Amp
Booth
R
ecord
Frequency Response
S/N Ratio (at 1 kHz)
Mic
Phono
Line
Distortion
Mic
Phono
Line
Equalizer
Control Frequencies
Boost/Cut R
ange
MIC Tone Control
Treble
Bass
Talkover Attenuation
Echo Delay Time
(PYD 2808)
Sampling Length
(PYD 3808)
Power Source
Dimensions, inches
(mm)
60, 150, 400, 1K, 2.4k,
6k,and 15k
+/- 12 dB from center
10kHz; +12/-12dB
100Hz; +12/-12dB
-16dB
20mS-200mS
12 Seconds
120 VAC, 60Hz/230 VAC, 50 Hz
19.0 x 3.86 x 9.45
(482 x 98 x 240)
pro series
Specifications
1.5 mV/600 Ohms, bal/unbal
3.0 mV/50K Ohms
150.0 mV/27K Ohms
1.5 V/10-kOhms
1.5 V/10-kOhms
150mV/10-kOhms
20Hz – 20kHz +/- 3 dB
>60 dB/1.5mV input
>70 dB/3.0mV input
>80 dB/150.0 mV input
0.20%
0.05%
0.03%