Filter
Top Products
Cassette Deck Operation
7
4. Repeat Steps 1–3 to program up to 20 tracks.
5. Press
ä
to play the stored tracks. The first stored
track number appears and plays.
6. Program play automatically stops at the end of the last
programmed track. To stop play sooner, press
'
.
4'8+'9+0)14'2.#%+0)"#"241)4#//'&"
5
'37'0%'"
While play is stopped, repeatedly press
PROGRAM
to review
the programmed sequence.
±
To replace a programmed track, press
PROGRAM
until the
track you want to replace appears. Press
SKIP/SEARCH
)
or
-
or to select the desired track, then press
PROGRAM
to
store the track. The old track is replaced by the newly
programmed track.
'4#5+0)"#"241)4#//'&"5'37'0%'
Do one of the following to erase a programmed sequence:
• Press
OPEN/CLOSE
before or after programmed play.
• Slide
FUNCTION SELECT
to
TAPE.
• Press
POWER.
%#55'66'"&'%-"12'4#6+10
1. Press
STOP/EJECT
ª
to open the cassette
compartment door.
2. Insert a cassette with the exposed tape down and the
desired side facing you. Avoid touching the tape.
3. Close the cassette compartment door by pressing on it
until it clicks shut.
4. Press
POWER
.
5. Slide
FUNCTION SELECT
to
TAPE
.
6. Press
PLAY
J
JJ
J
.
7. Rotate
MASTER VOLUME
to suit your listening
preference.
8. When the tape reaches its end, it automatically stops
and
PLAY
Jý
JýJý
Jý
is released. Press
STOP/EJECT
ªý
to stop
play sooner.
±
"016'"
±
"
You cannot review a programmed
sequence if programmed memory
is full (20 tracks).