Filter
Top Products
©2004. RadioShack Corporation.
All rights reserved. RadioShack and
RadioShack.com are trademarks
used by RadioShack Corporation.
32-2057
06A04
Printed in China
Make sure you connect the mixer’s left (white)
and right (red) jacks to your sources’ matching
left (white) and right (red) jacks. See your
user’s guide for complete instructions on
making connections.
connections
Remove the fuse compartment cap to replace the fuse.
LINE 1, 2, 3, 4 — connect audio sources, such as a
CD player, tape deck, VCR, or camcorder here.
OUTPUT REC L/R — connect your tape deck
here to record the mixer’s output signal.
OUTPUT AMP L/R — connect your receiver or amplifier here to
output the mixer sound through your stereo sound system.
MIC — connect a microphone
with a
1
/
4
-inch plug here.
PHONO 1/2 — connect up to two low-level
audio sources, such as a turntable here.
GND — connect the phono source’s
ground wire (green or black) here.
Depending on how you plan to use your
mixer, some or all of the
following items may
be purchased separately:
• audio patch cord
• microphone with an XLR plug
• microphone with
1
/
4
-inch plug
• stereo headphones
• 12V lamp bulb
accessories