Filter
Top Products
4
PREPARATION
CONNECTING THE
OUTPUTS
Connect your amplifier and a cassette
recorder to the audio output jacks on
the back of the mixer.
1. Connect the amplifier’s left and
right input jacks to the mixer’s
MAIN OUT
output jacks to play the
mixer’s sound.
2. Connect the tape recorder’s left
and right input jacks to the mixer’s
TAPE OUT
output jacks to record
the mixer’s sound.
CONNECTING INPUTS
AND PRESETTING
LEVELS
Connect your audio sources (AM/FM
tuners, CD players, cassette decks, or
phonograph players) to the audio in-
put jacks on the back of the mixer.
1. Connect the AC power cord to a
standard AC outlet.
2. Before turning on the power:
•Set
MIC
,
PHONO 1
,
PHONO 2
,
LINE 1
, and
LINE 2
to
0
.
•Set
NORMAL/STANDBY/TALK-
OVER
to
STANDBY
.
•Set
MONITOR LEVEL
fully coun-
terclockwise to minimum.
•Set
EQUALIZER BYPASS/ON
to
BYPASS
.
3. Set
POWER OFF/ON
to
ON
to turn
on the mixer’s power. The VU
meters and the power indicator
lights.
4. Connect a high-quality micro-
phone with a
1
/
4
-inch plug to the
MIC
terminal.
Note
: This is the remote (guest)
microphone.
5. Set
MIC
main volume control to
5
.
(illus - show the
left and ri
g
ht out-
put jacks.)
(illus - show the
left and ri
g
ht input
jacks.)
(illus)
32-3001.fm Page 4 Tuesday, August 10, 1999 8:02 AM