RCF RX1000 Microphone User Manual


 
ENGLISH
15
IMPORTANT NOTES
Before connecting and using this product, please read this instruction
manual carefully and keep it on hand for future reference. The manual is
to be considered an integral part of this product and must accompany it
when it changes ownership as a reference for correct installation and use
as well as for the safety precautions.
RCF S.p.A. will not assume any responsibility for the incorrect installation
and / or use of this product.
WARNING - To prevent the risk of fire or electric shock, never expose this
product to rain or humidity (except in case it has been expressly designed
and made for outdoor use).
SAFETY PRECAUTIONS
1. All the precautions, in particular the safety ones, must be read with
special attention, as they provide important information.
2.1 POWER SUPPLY FROM MAINS (direct connection)
a) The mains voltage is sufficiently high to involve a risk of electrocution;
therefore, never install or connect this product with the power
supply switched on.
b) Before powering up, make sure that all the connections have been
made correctly and the voltage of your mains corresponds to the
voltage shown on the rating plate on the unit, if not, please contact
your RCF dealer.
c) The metallic parts of the unit are earthed by means of the power cable.
In the event that the current outlet used for power does not provide
the earth connection, contact a qualified electrician to earth this
product by using the dedicated terminal.
d) Protect the power cable from damage; make sure it is positioned in a
way that it cannot be stepped on or crushed by objects.
e) To prevent the risk of electric shock, never open the product: there
are no parts inside that the user needs to access.
2.2 POWER SUPPLY BY MEANS OF AN EXTERNAL ADAPTER
a) Use the dedicated adapter only; verify the mains voltage corresponds
to the voltage shown on the adapter rating plate and the adapter
output voltage value and type (direct / alternating) corresponds to
the product input voltage, if not, please contact your RCF dealer;
verify also that the adapter hasn’t been damaged due to possible
clashes / hits or overloads.
b) The mains voltage, which the adapter is connected to, is sufficiently
high to involve a risk of electrocution: pay attention during the
connection (i.e. never do it with wet hands) and never open the
adapter.
c) Make sure that the adapter cable is not (or cannot be) stepped on or
crushed by other objects (pay particular attention to the cable part
near the plug and the point where it leads out from the adapter).