Revolabs 200 Microphone User Manual


  Open as PDF
of 3
 
Connecting the Cables
1. Place the RCA to 1/8” adapters on one end of each RCA cable
2. Connect a RCA audio cable between the RCA “CONF OUT” port on the Fusion
and the blue 1/8” “LINE IN” port on the LifeSize Team 200.
3. Connect a RCA audio cable between the RCA “CONF IN” port on the Fusion and
the green 1/8” “LINE OUT” port on the LifeSize Team 200.
4. Connect a Male RCA audio cable between the “ROOM OUT” port on the Fusion
and the Amplified Speakers.
4
2
3
NOTE: You must use your Fusion remote control to control the Team 200
volume for both the audio and video conference calls. Adjusting the volume
in the video codec will cause echo.
2
1
3
1
 previous