Connecting the Cables
CONNECTING A REVOLABS FUSION MICROPHONE SYSTEM TO POLYCOM HDX 8000 VIDEO CODEC
1. Connect a Male RCA-RCA audio cable between the “CONF OUT” port on the
Fusion and the red “Audio Input AUX” port on the HDX 8000.
2. Connect a Male RCA-RCA audio cable between the “CONF IN” port on the Fusion
and the red “AUDIO OUTPUT 1” port on the HDX 8000.
3. Connect a Male RCA audio cable between the “Room Out” port on the Fusion and
the Speakers.
Note: The speakers used for audio and video conferencing with this
configuration must be connected to the Fusion for proper echo cancellation.