Roland 80 Recording Equipment User Manual


  Open as PDF
of 4
 
4
Other Added Functions
Single Part Play
The JUPITER-80’s sound generator plays four parts in combination. If you
want to sound only one part (live set), you’ll need to turn o the other
parts.
The single part play registration limits the sounding parts to one part;
other parts will automatically be o.
1. Call up the registration [01]A-1.
2. Press the [DEC] button to select the registration
“[00]---: SINGLE PART PLAY.”
The single part play registration will be selected.
MEMO
• When using single part play, the Split function and Harmony
Intelligence function are unavailable.
• The results of editing a single part play registration can be saved as a
conventional registration ([01]A-1–[08]D-8).
Starting up with single part play
1. Press the [MENU] button.
2. In the MENU screen, touch <System>.
3. Touch the <SETUP> tab.
4. Touch <Startup>.
5. Set the value to “[00]---: SINGLE PART PLAY.”
6. Touch <SYSTEM WRITE> to save the setting.
When you turn on the power, the JUPITER-80 will start up in
single part play mode.
USB Driver
Here’s how to switch between the dedicated JUPITER-80 USB driver and
the generic driver provided by the operating system.
1. Press the [MENU] button.
2. In the MENU screen, touch <System>.
3. Touch the <SETUP> tab.
4. Touch <Beep/Misc>.
5. Choose the desired USB Driver.
Driver Description
VENDER
(MIDI+AUDIO)
The dedicated JUPITER-80 driver provided by Roland
will be used.
MIDI and audio will be available.
GENERIC
(MIDI only)
The generic driver provided by the operating system
will be used.
Only MIDI will be available.
MEMO
This setting will take eect after you perform System Write and then
turn the JUPITER-80’s power o, then on again.
6. Touch <SYSTEM WRITE> to save the settings.
7. Turn the power o, then on again.
Erasing an Arpeggio Style
In the Registration Common/Control (ARPEGGIO) screen, an [ERASE]
button has been added, allowing you to erase a user arpeggio style.
MEMO
If the message
“Cannot import.
No place to import the user arpeggio styles included in the
registration.
Please delete user styles to create free space.”
is shown, there is not enough space to import the user arpeggio
styles included in the registration.
Delete unneeded user arpeggio styles before you import the data.
* 5 1 0 0 0 2 7 3 8 8 - 0 1 *
 previous