Roland Cube-30 Bass Musical Instrument User Manual


 
Owner’s Manual
Thank you, and congratulations on your choice of the Roland CUBE-30 BASS Bass Amplifier.
These sections provide important information concerning the proper operation of the unit. Additionally,
in order to feel assured that you have gained a good grasp of every feature provided by your new unit,
Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a
convenient reference.
This unit is equipped with a protection circuit.
The protection circuit helps ensure safety by operating when excessive input continues for a long time
while the device is at a location with a high ambient temperature. Sound drop-out may occur when the
protection circuit is actuated during use.
Please read through the documentation carefully to ensure correct use.
Main Features
Adopting Roland’s original FFP technology, this highly functional DSP bass amp features 30-watt
sound output through a 25 cm (10-inch) coaxial 2-way wide-range speaker.
The amp is equipped with a total of seven COSM amp model types, including six of the most
popular bass amps along with an original amp sound that mixes in doubled bass sounds an octave
below those being played.
In addition to an easy-to-use “3-band equalizer,” this amp features a “Shape” function for even
greater flexibility in creating sounds and rich sound variation.
The amp is equipped with a total of three bass effect systems, including “COMPRESSION,” an
“EFX” system with CHORUS, FLANGER, and T-WAH, and basic “DELAY/REVERB”.
Equipped with RECORDING OUT jack convenient for use in recording and for use as headphone out.
Auxiliary input jack allows you to connect a CD player or other backing device.
FFP (Feed Forward Processing)
is system control technology that optimizes the performance
of the amp, speakers, and cabinet characteristics according to the signals being input, based on
the results of analyses of the operation and behavior of each section of existing amp systems.
COSM (Composite Object Sound Modeling)
is Roland’s innovative and powerful sound
modeling technology. COSM analyzes the many factors that make up the original sound, such as
the electrical and physical characteristics of the original, and then produces a digital model that
can reproduce the same sound.
220
* All product names mentioned in this document are trademarks or registered trademarks of their
respective owners.
Copyright © 2003 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
Before using this unit, carefully read the sections entitled:
IMPORTANT SAFETY INSTRUCTIONS (p. 2)
USING THE UNIT SAFELY (p. 3–4)
IMPORTANT NOTES (p. 4)
CUBE-30BASS_e.book 1 ページ 2006年9月8日 金曜日 午後2時28分