Roland Cube-30 Bass Musical Instrument User Manual


 
7
Main Specifications
Rated Power Output
30 W
Nominal Input Level (1kHz)
INPUT: -20 dBu
AUX IN: -10 dBu
Speaker
25 cm (10 inches) +
Tweeter (Coaxial, 2-way)
Controls
POWER Switch
<COMPRESSION>
COMPRESSION Knob
<COSM AMPLIFIER>
SHAPE Switch
TYPE Knob (OCTAVE BASS, FLIP TOP, B MAN, T.E, BASS 360,
SESSION, CONCERT 810)
GAIN Knob
VOLUME Knob
<EQUALIZER>
BASS Knob
MIDDLE Knob
TREBLE Knob
<EFX>
EFX Knob (CHORUS, FLANGER, T-WAH)
<DELAY/REVERB>
DELAY/REVERB Knob
Indicators
Power
COMPRESSION
EFX
Connectors
INPUT Jack (1/4 inch phone type)
AUX IN Jack (1/4 inch TRS phone type)
RECORDING OUT/PHONES Jack (STEREO 1/4 inch phone type)
FOOT Switch Jack (EFX, DELAY/REVERB) (1/4 inch TRS phone type)
Power Supply
AC 117 V, 230 V or 240 V
Power Consumption
34 W
Dimension
380 (W) x 300 (D) x 385 (H) mm
15-3/16 (W) X 9-1/2 (D) X 15 (H) inches
Weights
12 kg / 20 lbs 5 oz
Accessories
Owner’s Manual
Options
Foot switch FS-5U (BOSS)
Connection cable PCS-31
* 0 dBu = 0.775 Vrms
962a
* In the interest of product improvement, the specifications and/or
appearance of this unit are subject to change without prior notice.
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For EU Countries
For Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
NOTICE
AVIS
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
CUBE-30BASS_e.book 7 ページ 2006年9月8日 金曜日 午後2時28分