Roland DC-13 Musical Instrument Amplifier User Manual


 
Ibanez X-ING IMG2010
GK-1
_______________________________________
SYNTH SELECTION
Depress the [A/B] pedal, and the unit to be played
will change. You can tell whether Synth A or B is
currently selected by viewing the LED.
Red: The synth connected to Synth A is
selected.
Green: The synth connected to Synth B is
selected.
_______________________________________
SYNTH SELECTION WITH THE [BOTH] PEDAL SWITCH
Depress the [Both] pedal, and the LED will light in
yellow and both synths will be heard. However,
information about SW1 and SW2 (Mode Switch)
will be sent only to the device selected with the
[A/B] pedal switch.
Depress the pedal again, and the LED will go out
and only the device selected with the [A/B] pedal
switch will be heard.
_______________________________________
SPECIFICATIONS
DC-13 Dual Bus Converter:
Connectors: One 24-pin input
connector, two 13-pin output connectors,
2 1/4” standard phone jacks for line-level
guitar and hex fuzz.
Dimensions: 6(W) x 8(D) x 2 3/4(H)
inches
Weight: 1 lbs 4 oz
© copyright March 2005
www.gr300.com