Filter
Top Products
FR-1 V-Accordion
18
Alternatively, use the [DEC] or [INC] H
button to decrease or increase the
value in steps of “1”.
You can also press and hold these but-
tons to quickly select a significantly
higher or lower value. The setting range
is q= 20~250.
Note: Press the [DRUMS/DEFAULT] I button
or register [2] to return to the factory setting
of the currently selected parameter.
(3) Press the [SET] E register twice to leave
the FR-1’s FUNCTION mode.
Using the metronome
After setting the metronome parameters to
your liking, you can start using the metro-
nome:
(4) Press the [METRONOME÷INC] H button
(it lights) to start the metronome.
(5) Press it again to switch the metronome
back off.
Treble Mode
(only on the
model with button-type
keyboard)
Like for the accordion instrument itself,
there are different varieties of chromatic
(button-type) instruments, with different
Treble button layouts. Your FR-1 can simu-
late them.
Here is how to select the desired setting:
(1) Switch off the FR-1 by turning the
[VOLUME] A knob all the way to the
left (“POWER OFF”).
(2) Hold down [SET] and one of the follow-
ing registers while switching the FR-1
back on to select the desired setting.
Note: The small dot “•” means “factory set-
ting” .
(3) Start playing.
(See the owner’s manual on the supplied
CD-ROM for the locations of the notes.)
The FR-1 is supplied with additional white
and black buttons. The white buttons come
in two varieties: normal buttons and
knurled buttons. The latter are usually used
to indicate the “C” and “F” notes.
1• C-Griff Europe
2 C-Griff 2
3 B-Griff Bajan
1+2 B-Griff Fin
1+3 D-Griff 1
2+3 D-Griff 2
VOLUME
POWER
OFF
FR-1_QuickStart.book Page 18 Thursday, January 15, 2009 7:05 PM