Roland HP-2 Electronic Keyboard User Manual


 
23
Chapter 4. Recording Your Performance
Recording Along with a Song
You can record a performance that you play along with an internal song.
Using the [1] or [2] buttons, you can (for example) perform and record just the right-
hand part of a song while listening to the left-hand playback of an internal song.
fig.panel4-3
Selecting the song to record
1
Press the [Song/Tempo] button, getting its indicator to light in red.
The display will indicate the song number.
2
Use the [+] or [-] button to select the song that you want to play.
3
As necessary, set the metronome and tempo (p. 14).
4
Press the [Rec] button.
The [Rec] button’s indicator will light.
Selecting the track to record
5
Press the [1] or [2] button.
When you want to record the left-hand performance, press the [1] button; to record
that of the right hand, press the [2] button.
The indicators of the button you pressed and of the [Play] button will blink, and the
HP-2 enters recording-standby mode.
Starting to record
6
Press the [Play] button.
Recording begins after two measures of count sound.
Play along with the song.
Stop recording
7
Press the [Play] or [Rec] button.
Recording will stop, and the indicators for the [Play] and [Rec] buttons will go dark.
The recorded performance is stored in “USr (User).”
Play back the recorded performance
8
Press the [Play] button.
You will hear the recorded performance.
Once again press the [Play] button, and playback will stop.
4, 72 3 1
6, 8
5
If “dEL” appears in the
display, refer to p. 21.
When a recorded performance
is played back, the metronome
sounds the sound that was
selected when the recording
was made.
HP-2_e.book 23 ページ 2003年12月17日 水曜日 午前11時8分