![](http://pdfasset.owneriq.net/b/86/b86f7ae2-4038-4854-aafd-b2327120b0b7/b86f7ae2-4038-4854-aafd-b2327120b0b7-bg5.png)
5
The PD-125XS (dedicated snare pad) has no mounting
bracket so can only be used with a snare stand.
Make sure that the snare stand you are using is able to
support a 12-inch shell.
The PD-125X/105X can be attached to a stand that has either
a vertical rod or a horizontal pipe.
Stand with vertical rod (MDS series)
fig.03-j.epsfig
Stand with horizontal pipe
fig.03-j.epsfig
It was already mentioned that mounting a PD-125XS requires
a snare stand that can support a 12-inch shell.
For the PD-105X, the stand must support a 10-inch shell.
Tighten the knob that fastens bracket securely to assure
the best functionality.
Mounting the Pads
Mounting the PD-125XS
(Dedicated Snare Pad)
Mounting the PD-125X or 105X on
a Tom Stand
Mounting the PD-125X or 105X on
a Snare Stand
Rod diameter that can be attached: 9–11.5 mm (3/8–1/2 inch)
Loosen
Tighten
Usable pipe size: 22.2 mm (7/8 inch)
Loosen
Tighten
PD-125X_125XS_105X_e.book 5 ページ 2009年5月18日 月曜日 午前9時23分