Filter
Top Products
4
* The figure shows the PD-125.
* The only difference between the PD-125 and the PD-105 is the diameter.
fig.
Use a Stereo cable to make connections. If you use a monaural cable, rim shots cannot
be played. You can play rim shots when the pad is connected to the trigger input
shown below.
Rim Shot Capable Trigger Inputs for Each Sound Module
Make sure the snare drum stand you use is designed to firmly hold a 12-inch (PD-
125) or 10-inch (PD-105) drum.
When mounting the PD-125/105 to a tom stand, verify the dimension of the rod.
(6.3–12.5 mm)
fig.
Component (Parts) Names
Setup
Connecting to the Sound Module
TD-20
2 (SNARE), 3–6 (TOM 1–4), 12–15 (AUX 1–4)
TD-10
2 (SNARE)
TD-8
3 (SNARE)
TD-6V/6
2 (SNARE)
Mounting with a Snare Stand
Mounting with a Tom Stand
Hoop (rim)
Lugs
Output jack
Shell
Bracket
Frame
Head
Stand fixing
screw
Tuning bolts
To prevent malfunction and/
or damage to speakers or other
devices, always turn down the
volume, and turn off the
power on all devices before
making any connections.
Be sure to tighten the stand
fixing screw to prevent the
noise.
Rod (diameters which can be attached: 6.3–12.5 mm)
tightenloosen
PD-125_105_e 4 ページ ２００３年１１月２８日 金曜日 午後４時２４分