Filter
Top Products
PK-5A Miscellaneous
14
r
If your PK-5A fails to operate
• Make sure that the 6 Alkaline Batteries (MN
1500) are not below their charge limit.
When using the optional AC adapter, check
whether its cord is firmly plugged into the
socket on the rear panel [2]. Also check whether
the adapter is firmly plugged into the AC wall
outlet.
Check whether the wall outlet works as
expected. Plug in a lamp or radio to test the
wall outlet.
• Set the POWER switch [3] (located on the rear
panel) to the ON position.
• If the PK-5A is still inoperable, your Roland
technician or dealer is best qualified to provide
you with competent service. Do not perform
any adjustments or repairs yourself.
Specifications
Pedalboard
13-key polyphonic/monophonic pedalboard
Dynamics: 13 different velocity curves (select-
able at power-on)
Velocity: on/off
MIDI Soft Thru: the messages received via
MIDI IN are transmitted via MIDI OUT
Modes
— MONO
— POLY
— DRUMS
— SOUND EFFECTS
— MIDI CONTROLLER
Functions
— OCT/SELECT & FACTORY SET
— PRG CHANGE & USER SET
MIDI CHANNEL functions
→MONO:
Octave (0~8)
Select (Velocity, Hold, Retrigger, Octaver)
Program change numbers (1~128)
Bank Select MSB/CC00 (0~127)
Bank Select LSB/CC32 (0~127)
MIDI channel (1~16)
→POLY:
Octave (0~8)
Select (Velocity, Dump, Battery Check, Trans-
pose)
Program change numbers (1~128)
Bank Select MSB/CC00 (0~127)
Bank Select LSB/CC32 (0~127)
MIDI channel (1~16)
→DRUMS:
Factory Set
User Set (programmable)
MIDI Channel (1~16)
→SOUND EFFECTS:
Factory Set
User Set (programmable)
MIDI channel (1~16)
→MIDI CONTROLLER:
Factory Set
User Set (programmable)
MIDI channel (1~16)
Rear panel
— AC adaptor socket
— POWER ON/OFF switch
— MIDI sockets (THRU/OUT/IN)
Dimensions:
425 x 560 x 120 mm.
Weight
8 kg
Options
Adapters: BOSS ACA 220 (9V/300 mA), 220V
BOSS ACA 240 (9V/100 mA), 240V
BOSS ACA 120 (9V/200 mA), 117V
BOSS ACA 100 (9V/150 mA), 100V
Note: Specifications are subject to change without
prior notice.
PK-5A book Page 14 Thursday, July 24, 2003 6:26 PM