Filter
Top Products
Changing the Settings of the Sound
Changing the Settings of the Metronome
Performing in Live Mode
Press one of the memory buttons whose
settings you want to change.
Press the [INST] button.
Turn the select knob to select the
parameter that you want to edit, and then
press the select knob.
If you want to change the sound, tuning, or volume,
strike the head or the rim to specify which you want
to change.
Turn the select knob to edit the value, and
then press the select knob.
When you’ve finished editing, press the
[INST] button.
If you decide to cancel the settings, turn the select
knob to select “[CANCEL],” and then press the select
knob.
1
2
Press the [BEAT] button.
The procedure is the same as steps 3
through 4 in “Changing the Settings
of the Sound.”
By selecting “Live mode,” you can lock the functions of
the buttons that won’t be used in an actual performance.
By holding down the [INST] button
for a while, you can enter Live mode.
To cancel Live mode, hold down the
[INST] button.
1
When you’ve finished editing, press the
[BEAT] button.
4
2
1
2
3
3
4
5
Parameter
(sound
name)
Tune
Volume
[Name..]
Value
1–128,
129 (OFF)
-600–+600
(cent)
DYNA1,
DYNA2
0–100
Explanation
If you choose “129,” there will be
no sound when you strike the
pad.
Adjusts the tuning.
The pitch will change according
to the force of your strike. The
pitch will rise for strong strikes,
and fall for weak strikes.
“DYNA1” will change the pitch
smoothly according to the force
of your strike.
“DYNA2” will change the pitch in
semitone steps according to the
force of your strike.
Adjusts the volume balance.
Renames the setting. (maximum
of seven characters)
Parameter
Beat
Rhythm
Volume
Sound
Grade
LineOut
Value
0–13
(note
value)
0–10
1–7
EASY,
HARD
ON, OF
* If there are only two values, you can press the select knob to toggle
between the two values.
Explanation
Specifies the time signature of
the metronome. If you select “0,”
no accent will be applied.
Specifies how the metronome
will sound.
Adjusts the volume of the
metronome.
Changes the sound of the
metronome.
Specifies whether the Time Check
indicator will evaluate your playing
leniently (EASY) or strictly (HARD).
Specifies whether the
metronome sound will be sent
from the OUTPUT jack (ON) or
not sent (OF).
If you press the select knob in Live mode, Mute will be
momentarily activated while you hold down the knob.
If you hold down the select knob and turn it towards
the plus (+) sign at least one third of a turn, Mute will
remain activated. To cancel Mute, press the select knob.
No Sound will Occur When You Strike the Pad <
MUTE>
RMP-12_l_e.fm 2 ページ ２００８年７月１０日 木曜日 午前１０時３３分