Filter
Top Products
13
Playing the Keyboard
fig.4-03.e
2. After releasing the button, play the keyboard.
The button indicator stops blinking and stays on, indicating that the tone selected in Step
1 has been assigned to the [Tone] button.
Layering Two Instrument Sounds— Dual Play
Playing with two different tones on the keyboard simultaneously is called “Dual Play.”
Layering the Piano tones and Strings tones
1. First, assign the Strings tone to the [Tone] button.
fig.4-04.e
Tone
While holding down...
Press
When assigning tones to the [Tone] button, the tone is set by first selecting the
tone in Step 1 (indicator blinks), then playing the keyboard in Step 2 (indicator is
lit). You can also set the tone by pressing the blinking [Tone] button instead of
playing the keyboard. If you don’t want to set the tone, then press the [Piano]
button.
Tone
Release the button and
play the keyboard.
Playing the keyboard sets
the assigned tone.
Press
While holding down...