Filter
Top Products
1
Thank you for purchasing the CL5 Condenser Microphone from Samson
Audio. The CL5 is a handheld, externally biased, true capacitor (condenser)
pressure gradient microphone that excels in both live performance and
recording applications. Designed for the discriminating artist and sound
engineer, the CL5 provides the warmth, presence, air and detail of a high-
end studio condenser in a convenient handheld body, ideal for on stage
applications. The heart and soul of the CL5 is its sophisticated capsule and
advanced head-amp electronics. The microphone employs and half-inch cap-
sule with a 3 micron, gold sputtered, tensioned diaphragm with the ability to
capture every detail of the sound source. The head-amp has been designed
using high-speed, low-noise operational amplifiers along with carefully
selected discrete components to provide extended bandwidth and low
noise. In addition to its linear frequency response, the microphone has also
been designed to withstand high sound pressure level capabilities of 148 dB.
The CL5’s cardioid pick up pattern ensures maximum gain before feedback
and the dual stage windscreen, greatly reduces the chance of "p popping".
The CL5’s stylish and ergonomic body has been designed to provide comfort
and maximum feedback rejection. The microphone can easily be mounted to
any standard mic stand using the included mic clip. The microphone comes
complete with a soft cloth mic sock and aluminum carry case. Ideal for a
variety of miking applications from vocals to instruments, ensembles to solo-
ist, to just about any sound source that needs to be amplified or recorded,
the CL5 condenser microphone brings a high level of accuracy and audio
performance. For the serious vocalist who wants a studio quality condenser
microphone on stage, the CL5 is the perfect solution.
Should your microphone ever require servicing, a Return Authorization num-
ber (RA) must be obtained before shipping your unit to Samson. Without this
number, the unit will not be accepted. Please call Samson at 1-800-3SAMSON
(1-800-372-6766) for a Return Authorization number prior to shipping your
unit. Please retain the original packing materials and if possible return the
unit in the original carton and packing materials. If you purchased your
Samson product outside the United States, please contact your local distrib-
utor for warranty information and service.
Also, be sure to check out our website (www.samsontech.com) for complete
information about our full product line.
Introduction
1