Samson MXP124FX Music Mixer User Manual


 
14
Top Panel Controls
Digital Effects Section (MXP124FX only)
The following section describes the features control of the on-
board 24-bit digital Multi-effects section.
16. PROGRAM Effects Display - The mixer’s multi-effects
processors feature a dual digit, seven-segment numerical
display for showing the effects PROGRAM number from
00 - 99.
17. SELECT Control Knob - The SELECT control knob is a
continuously variable encoder to call up one of the 100
built-in digital effects presets. Rotate the SELECT knob to
scroll through the preset programs and press to load the
selected effect.
18. On/Peak Indicator - This LED indicator lights green when
the Digital Effects is turned on. The indicator lights red
when the input signal to the internal Digital Effects is
overloaded.
19. Effects ON Switch - The effects ON switch is used to turn
the internal digital effect on and off. The effects are by-
passed when the switch is in the out position.
20. MAIN MIX Control - The MAIN MIX control is used to adjust
the level of the effects from the built-in digital effect that
is sent to the MAIN MIX bus. This allows you to hear the
DSP effects in your main speakers.
16
17
18
19
20