Filter
Top Products
WARNING: To reduce the risk of re or electric shock, do not expose this unit to rain or moisture. To
reduce the hazard of electrical shock, do not remove cover or back. No user serviceable parts inside.
Please refer all servicing to qualied personnel.The lightning ash with an arrowhead symbol within
an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”
within the products enclosure that may be of sucient magnitude to constitute a risk of electric shock
to persons. The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompa-
nying the product.
Important Safety Instructions
1. Please read all instructions before operating the unit.
2. Keep these instructions for future reference.
3. Please heed all safety warnings.
4. Follow manufacturers instructions.
5. Do not use this unit near water or moisture.
6. Clean only with a damp cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instruc-
tions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or third prong is provided for your safety. When the provided plug does not t
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on and pinched particularly at plugs, convenience
receptacles and at the point at which they exit from the unit.
11. Unplug this unit during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualied personnel. Servicing is required when the unit has been damaged in
any way, such as power supply cord or plug damage, or if liquid has been spilled or objects have fallen
into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been
dropped.
ATTENTION: Pour éviter tout risque d’électrocution ou d’incendie, ne pas exposer cet appareil à
la pluie ou à l’humidité. Pour éviter tout risque d’électrocution, ne pas ôter le couvercle ou le dos
du boîtier. Cet appareil ne contient aucune pièce remplaçable par l’utilisateur. Conez toutes les
réparations à un personnel qualié. Le signe avec un éclair dans un triangle prévient l’utilisateur
de la présence d’une tension dangereuse et non isolée dans l’appareil. Cette tension constitue un
risque d’électrocution. Le signe avec un point d’exclamation dans un triangle prévient l’utilisateur
d’instructions importantes relatives à l’utilisation et à la maintenance du produit.
Consignes de sécurité importantes
1. Veuillez lire toutes les instructions avant d’utiliser l’appareil.
2. Conserver ces instructions pour toute lecture ultérieure.
3. Lisez avec attention toutes les consignes de sécurité.
4. Suivez les instructions du fabricant.
5. Ne pas utiliser cet appareil près d’une source liquide ou dans un lieu humide.
6. Nettoyez l’appareil uniquement avec un tissu humide.
7. Veillez à ne pas obstruer les fentes prévues pour la ventilation de l’appareil. Installez l’appareil selon
les instructions du fabricant.
8. Ne pas installer près d’une source de chaleur (radiateurs, etc.) ou de tout équipement susceptible de
générer de la chaleur (amplicateurs de puissance par exemple).
9. Ne pas retirer la terre du cordon secteur ou de la prise murale. Les ches canadiennes avec polarisa-
tion (avec une lame plus large) ne doivent pas être modiées. Si votre prise murale ne correspond pas
au modèle fourni, consultez votre électricien.
10. Protégez le cordon secteur contre tous les dommages possibles (pincement, tension, torsion,, etc.).
Veillez à ce que le cordon secteur soit libre, en particulier à sa sortie du boîtier.
11. Déconnectez l’appareil du secteur en présence d’orage ou lors de périodes d’inutilisation prolon-
gées.
12. Consultez un service de réparation qualié pour tout dysfonctionnement (dommage sur le cordon
secteur, baisse de performances, exposition à la pluie, projection liquide dans l’appareil, introduction
d’un objet dans le boîtier, etc.).
ACHTUNG: Um die Gefahr eines Brandes oder Stromschlags zu verringern, sollten Sie dieses Gerät
weder Regen noch Feuchtigkeit aussetzen.Um die Gefahr eines Stromschlags zu verringern, sollten
Sie weder Deckel noch Rückwand des Geräts entfernen. Im Innern benden sich keine Teile, die vom
Anwender gewartet werden können. Überlassen Sie die Wartung qualiziertem Fachpersonal.Der Blitz
mit Pfeilspitze im gleichseitigen Dreieck soll den Anwender vor nichtisolierter “gefährlicher Spannung”
im Geräteinnern warnen. Diese Spannung kann so hoch sein, dass die Gefahr eines Stromschlags
besteht. Das Ausrufezeichen im gleichseitigen Dreieck soll den Anwender auf wichtige Bedienungs-
und Wartungsanleitungen aufmerksam machen, die im mitgelieferten Informationsmaterial näher
beschrieben werden.
Wichtige Sicherheitsvorkehrungen
1. Lesen Sie alle Anleitungen, bevor Sie das Gerät in Betrieb nehmen.
2. Bewahren Sie diese Anleitungen für den späteren Gebrauch gut auf.
3. Bitte treen Sie alle beschriebenen Sicherheitsvorkehrungen.
4. Befolgen Sie die Anleitungen des Herstellers.
5. Benutzen Sie das Gerät nicht in der Nähe von Wasser oder Feuchtigkeit.
6. Verwenden Sie zur Reinigung des Geräts nur ein feuchtes Tuch.
7. Blockieren Sie keine Belüftungsönungen. Nehmen Sie den Einbau des Geräts nur entsprechend
den Anweisungen des Herstellers vor.
8. Bauen Sie das Gerät nicht in der Nähe von Wärmequellen wie Heizkörpern, Wärmeklappen, Öfen
oder anderen Geräten (inklusive Verstärkern) ein, die Hitze erzeugen.
9. Setzen Sie die Sicherheitsfunktion des polarisierten oder geerdeten Steckers nicht außer Kraft. Ein
polarisierter Stecker hat zwei ache, unterschiedlich breite
Pole. Ein geerdeter Stecker hat zwei ache Pole und einen dritten Erdungsstift. Der breitere Pol oder
der dritte Stift dient Ihrer Sicherheit. Wenn der vorhandene
Stecker nicht in Ihre Steckdose passt, lassen Sie die veraltete Steckdose von einem Elektriker ersetzen.
10. Schützen Sie das Netzkabel dahingehend, dass niemand darüber laufen und es nicht geknickt
werden kann. Achten Sie hierbei besonders auf Netzstecker, Mehrfachsteckdosen und den Kabelan-
schluss am Gerät.
11. Ziehen Sie den Netzstecker des Geräts bei Gewittern oder längeren Betriebspausen aus der Steck-
dose.
12. Überlassen Sie die Wartung qualiziertem Fachpersonal. Eine Wartung ist notwendig, wenn das
Gerät auf irgendeine Weise, beispielsweise am Kabel oder Netzstecker beschädigt wurde, oder wenn
Flüssigkeiten oder Objekte in das Gerät gelangt sind, es Regen oder Feuchtigkeit ausgesetzt war, nicht
mehr wie gewohnt betrieben werden kann oder fallen gelassen wurde.
Safety Instructions/Consignes de sécurité/Sicherheitsvorkehrungen Instrucciones de seguridad / Istruzioni di Sicurezza
PRECAUCION: Para reducir el riesgo de incendios o descargas, no permita que este aparato quede
expuesto a la lluvia o la humedad. Para reducir el riesgo de descarga eléctrica, nunca quite la tapa
ni el chasis. Dentro del aparato no hay piezas susceptibles de ser reparadas por el usuario. Dirija cu-
alquier reparación al servicio técnico ocial. El símbolo del relámpago dentro del triángulo equilátero
pretende advertir al usuario de la presencia de “voltajes peligrosos” no aislados dentro de la carcasa
del producto, que pueden ser de la magnitud suciente como para constituir un riesgo de descarga
eléctrica a las personas. El símbolo de exclamación dentro del triángulo equilátero quiere advertirle de
la existencia de importantes instrucciones de manejo y mantenimiento (reparaciones) en los docu-
mentos que se adjuntan con este aparato.
Instrucciones importantes de seguridad
1. Lea todo este manual de instrucciones antes de comenzar a usar la unidad.
2. Conserve estas instrucciones para cualquier consulta en el futuro.
3. Cumpla con todo lo indicado en las precauciones de seguridad.
4. Observe y siga todas las instrucciones del fabricante.
5. Nunca utilice este aparato cerca del agua o en lugares húmedos.
6. Limpie este aparato solo con un trapo suave y ligeramente humedecido.
7. No bloquee ninguna de las aberturas de ventilación. Instale este aparato de acuerdo a las instruc-
ciones del fabricante.
8. No instale este aparato cerca de fuentes de calor como radiadores, calentadores, hornos u otros
aparatos (incluyendo amplicadores) que produzcan calor.
9. No anule el sistema de seguridad del enchufe de tipo polarizado o con toma de tierra. Un enchufe
polarizado tiene dos bornes, uno más ancho que el otro. Uno con toma de tierra tiene dos bornes
normales y un tercero para la conexión a tierra. El borne ancho o el tercero se incluyen como medida
de seguridad. Cuando el enchufe no encaje en su salida de corriente, llame a un electricista para que
le cambie su salida anticuada.
10. Evite que el cable de corriente quede en una posición en la que pueda ser pisado o aplastado,
especialmente en los enchufes, receptáculos y en el punto en el que salen de la unidad.
11. Desconecte de la corriente este aparato durante las tormentas eléctricas o cuando no lo vaya a
usar durante un periodo de tiempo largo.
12. Dirija cualquier posible reparación solo al servicio técnico ocial. Deberá hacer que su aparato
sea reparado cuando esté dañado de alguna forma, como si el cable de corriente o el enchufe están
dañados, o si se han derramado líquidos o se ha introducido algún objeto dentro de la unidad, si esta
ha quedado expuesta a la lluvia o la humedad, si no funciona normalmente o si ha caído al suelo.
ATTENZIONE: per ridurre il rischio di incendio o di scariche elettriche, non esponete questo ap-
parecchio a pioggia o umidità. Per ridurre il pericolo di scariche elettriche evitate di rimuoverne il
coperchio o il pannello posteriore. Non esistono all’interno dell’apparecchio parti la cui regolazione è
a cura dell’utente. Per eventuale assistenza, fate riferimento esclusivamente a personale qualicato.
Il fulmine con la punta a freccia all’interno di un triangolo equilatero avvisa l’utente della presenza di
“tensioni pericolose” non isolate all’interno dell’apparecchio, tali da costituire un possibile rischio di
scariche elettriche dannose per le persone. Il punto esclamativo all’interno di un triangolo equilatero
avvisa l’utente della presenza di importanti istruzioni di manutenzione (assistenza) nella documentazi-
one che accompagna il prodotto.
Importanti Istruzioni di Sicurezza
1. Prima di usare l’apparecchio, vi preghiamo di leggerne per intero le istruzioni.
2. Conservate tali istruzioni per una eventuale consultazione futura.
3. Vi preghiamo di rispettare tutte le istruzioni di sicurezza.
4. Seguite tutte le istruzioni del costruttore.
5. Non usate questo apparecchio vicino ad acqua o umidità.
6. Pulite l’apparecchio esclusivamente con un panno asciutto.
7. Evitate di ostruire una qualsiasi delle aperture di ventilazione. Posizionatelo seguendo le istruzioni
del costruttore.
8. Non posizionatelo vicino a sorgenti di calore come radiatori, scambiatori di calore, forni o altri ap-
parecchi (amplicatori compresi) in grado di generare calore.
9. Non disattivate la protezione di sicurezza costituita dalla spina polarizzata o dotata di collegamento
a terra. Una spina polarizzata è dotata di due spinotti, uno più piccolo ed uno più grande. Una spina
dotata di collegamento a terra è dotata di due spinotti più un terzo spinotto di collegamento a terra.
Questo terzo spinotto, eventualmente anche più grande, viene fornito per la vostra sicurezza. Se la
spina fornita in dotazione non si adatta alla vostra presa, consultate un elettricista per la sostituzione
della presa obsoleta.
10. Proteggete il cavo di alimentazione in modo che non sia possibile camminarci sopra né piegarlo,
con particolare attenzione alle prese, ai punti di collegamento e al punto in cui esce dall’apparecchio.
11. Staccate l’apparecchio dalla alimentazione in caso di temporali o tempeste o se non lo usate per
un lungo periodo.
12. Per l’assistenza, fate riferimento esclusivamente a personale qualicato. È necessaria l’assistenza se
l’apparecchio ha subito un qualsiasi tipo di danno, come danni al cavo o alla spina di alimentazione,
nel caso in cui sia stato versato del liquido o siano caduti oggetti al suo interno, sia stato esposto a
pioggia o umidità, non funzioni correttamente o sia stato fatto cadere.
Block Diagram
-32dBu to -14dBu (MIC, XLR)
-6dBu to +12dBu (LINE, XLR)
-32dBu to -6dBu (MIC, XLR)
-6dBu to +20dBu (LINE, XLR)
-22dBu to -4dBu (MIC, TRS)
+4dBu to +22dBu (LINE, TRS)
-22dBu to +4dBu (MIC, TRS)
+4dBu to +30dBu (LINE, TRS)
XP510i System Set-ups
XP510i Mixer Layout
1
3
4
5
6
7
2 8 10 11
12
13
21
18 19
20
914
17
15
16
1. Channel Input Jacks (channels 1 - 4)
MIC – XLR connector – Use these XLR jacks to connect
low impedance microphones to the XP510i’s built-in
mic preamps.
LINE - 1/4-inch phone connector – Use these 1/4”
jacks to connect instrument or audio sources with
line-level signals to the XP510i. You can connect the
outputs from acoustic guitar pickups, keyboards, drum
machines, CD/MP3/TAPE players and other units with
line level outputs here.
2. Stereo Channel Input Jacks (channels
5/6, 7/8, 9/10)
For stereo inputs, use the LINE L to connect the left
channel and the LINE R to connect the right chan-
nel. Use these inputs to connect high impedance
microphones, synthesizers, drum machines, MP3, CD,
tape players or any other line level device. The XP510i
features both 1/4” phone and RCA connectors.
3. MIC/LINE switch (channels 1 - 4)
The MIC position changes the gain of both input jacks
to MIC level. The LINE position reduces the gain of both
jacks by 30dB to line level.
4. LIMIT/COMP switch
Set the LIMIT/COMP switch to the COMP position to
apply compression or set it to the LIMIT position to
apply limiting.
5. Equalizer control knobs
HIGH FREQUENCY (HF) – The HF knob controls the
amount of Treble applied to each channel. The chan-
nel’s HIGH frequency response is at when the knob
is in the “12:00” position. Rotating the knob to the
right will boost the channel’s high frequency response
above 10 kHz by 15 dB, and rotating it towards the left
will cut the high frequency response by 15 dB.
LOW FREQUENCY (LF) – The LF knob controls the
amount of Bass applied to each channel. The channel’s
LOW frequency response is at when the knob is in
the “12:00” position. Rotating the knob to the right will
boost the channel’s low frequency response below 100
Hz by 15 dB, and rotating it towards the left will cut the
low frequency response by 15 dB.
6. REVERB switch
Use the REVERB switch to add an eect to a Mic or
Line input on any of the inputs 1 – 4. The REVERB LED
indicator lights GREEN when the REVERB is ON.
7. VOLUME control knob
This knob sets the overall level for the Mic or Line
input.
NOTE: To reduce noise, set the VOLUME controls on
any unused channels to the minimum setting.
8. MONITOR OUT jacks
The signal present at the MONITOR OUT jacks is sent
from the MONITOR level control knob, which is fed
from the input channels. The MASTER control does not
aect the MONITOR OUT signal.
9. REC OUT jacks
This output is used to send the main mix to an external
recorder. The signal present at this connector is the L/R
bus signal before it has passed through the MASTER
level control. The nominal output level is -10 dBV and
the impedance is 100 Ohms.
10. SPEAKER OUT jacks
The XP510i has two 1/4-inch phone connectors, which
are powered outputs used to connect your left and
right speaker. Use the included speaker cables to con-
nect the speakers.
CAUTION: The total impedance load for each side of
the amplier must not be less than 8 Ohms. Do not
connect additional speakers to the XP510i mixer.
11. AC – IEC inlet
Connect the supplied heavy-gauge 3-pin “IEC” power
cable here.
12. POWER switch
Use the POWER switch to turn power to the XP510i on
or o.
13. iPOD DOCK
The XP510i has a built-in iPod dock which can be used
to connect most of the latest iPod models. The iPod sig-
nal is controlled by the Channel 9/10 VOLUME control.
14. SPEECH/MUSIC switch
The SPEECH/MUSIC switch is used to change the over-
all frequency response, or tone contour, for the XP510i
sound system. If your application is mainly for MUSIC,
press the switch down to select the MUSIC response
curve. If your application is mainly for SPEECH, leave
the switch up to select the SPEECH response curve.
15. MONITOR control knob
The MONITOR volume control is used to control the
overall level sent to the MONITOR OUT, which can be
used to send to a second set of powered speakers for
monitors.
16. REVERB PROGRAM selector
This control knob is used to select one of ten, 24-bit
DSP eects programs.
17. REVERB control knob
The REVERB control knob is used to adjust the total
amount of reverb added to any channel that has its
REVERB switch (see #6) pressed down.
18. MASTER control knob
The MASTER volume knob controls the overall output
level. This knob determines the nal output signal
level. Signals from all ten channels are routed here just
before being routed to the built-in power ampliers
and Left and Right speaker output jacks (see #10).
19. METER LED indicators
This six-segment bar meter shows the XP510i’s output
level. For optimum signal-to-noise ratio, set the
VOLUME control so that program material is usually at
or around +3 to +6 VU, with occasional, but not steady
excursions to the red “LIMIT” segment.
20. PHANTOM switch
The XP510i features an onboard, Phantom power
supply to operate condenser microphones. When the
switch is engaged, the LED will illuminate indicating
that phantom power is now available on the micro-
phone pre-amps.
IMPORTANT NOTE: To avoid a loud pop, be sure to
turn down the MASTER level control before plugging
and unplugging the mic cables when the phantom
power is active.
21. POWER LED indicator
The Power LED will illuminate when the MAIN power
switch is turned on.
Applying Reverb
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION. SUITABLE FOR HOME OF OFFICE USE.
Copyright 2010 - Samson Technologies Corp.
Samson Technologies Corp.
45 Gilpin Avenue
Hauppauge, New York 11788-8816
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 631-784-2201
www.samsontech.com
V1.6
The XP510i features built-in, high quality, 24-bit Reverb Eects that you can add to channels 1 through 4. You can
use the reverb to create a studio eect by simply following the steps below:
1. Connect a mic or instrument to the desired channel, and adjust the volume and equalizer to your liking.
2. Use the Reverb Program selector to choose one of the ten built-in digital eects.
3. Press the REVERB switch down on the channel to which you want to add the reverb eect.
4. Once you have selected the channel(s) for eects by using the channel REVERB switch, raise the REVERB main
level control to apply the amount of reverb desired.
If you want to dispose this product, do not mix it with general household waste. There is a
separate collection system for used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling.
Private household in the 25 member states of the EU, in Switzerland and Norway may return their used
electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar
new one).
For Countries not mentioned above, please contact your local authorities for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.