Filter
Top Products
6
SK 2 bodypack transmitter
Inserting/replacing the battery
We recommend powering the bodypack transmitter by a 9 V PP3
alkaline battery (IEC 6 LR 61). If powered by a rechargeable 9 V battery,
the operating time will be drastically reduced.
̈ Open the battery compartment by first sliding the battery
compartment cover in the direction of the arrow. Then flip the
battery compartment cover open.
̈ Insert the battery as shown. Please observe correct polarity when
inserting the battery.
̈ Close the battery compartment.
Note:
When the red LED · goes off during operation, you must replace
the battery as soon as possible.
Operating controls
³ ON/OFF button
· Operation and battery status indication, red LED
» Microphone/instrument input,
3.5 mm jack socket (lockable)
¿ Antenna (can be screwed off)
´ Battery compartment cover
² MIC/INST slide switch
¶ Serial number
º Channel selector switch CH (1 to 4)
¾ Sensitivity control GAIN
µ Type plate
¸ Belt clip
·
freeport_514013_0808_Sp5.book Seite 6 Mittwoch, 26. November 2008 2:16 14