Sennheiser IAS-MO 2000 Microphone User Manual


 
8
To mount two central units into a rack:
̈ Place the two central units side by side upside-down onto a flat surface.
̈ Align the jointing plate over the holes in the bottom sides of the central
units.
̈ Secure the jointing plate to the central units using eight of the supplied
recessed head screws (M 3x6).
̈ Hook the two rack mount “ears” the front panels of the central units.
̈ Secure the rack mount “ears” to the central units using two of the sup-
plied recessed head screws (M 3x6) respectively.
̈ Slide the central units into the 19” rack.
̈ Secure the rack mount “ears” to the rack.
To mount only one central unit into a rack:
̈ Hook the two rack mount “ears” to the front panel of the central unit.
̈ Secure the rack mount “ears” to the central unit using two of the supplied
recessed head screws (M 3x6) respectively.
̈ Secure the blanking plate to one of the rack mount “ears” using two
of the supplied recessed head screws (M 6x10).
̈ If you are not front mounting the BNC output connector, insert the two
blanking plugs into the holes of the blanking plate.
̈ Slide the central unit into the 19” rack.
̈ Secure the rack mount “ears” to the rack.
Connecting the mains unit
̈ Connect the supplied mains unit to the socket (DC IN). Use the cable
grip to secure the power supply DC cable.
̈ Connect the suitable adapter to the mains unit .
̈ Connect the mains unit to the mains.
The device switches on automatically.
Connecting the amplifier
The audio outputs are available as a balanced XLR-3M output and an
unbalanced BNC output , allowing you to simultaneously connect two
devices (amplifier, etc.). Both outputs deliver the same output voltage, are
short-circuit proof and decoupled from each other.
̈ Connect the amplifier/mixing console to the balanced XLR-3M output
or the unbalanced BNC output .
For details on balanced or unbalanced connection, see “Connector assign-
ment” on page 15.
0
9
9
9
9
8
A
AF OUT
BAL/UNBAL
DC IN
12V/150mA
LEV 6dBu MAX
´ ²
AF OUT
BAL/UNBAL
DC IN
12V/150mA
LEV 6dBu MAX
ºº