Filter
Top Products
----
MICROPHONE HEAD ME 88
The microphone head ME 88 is apart of the Sennheiser Telemike
system and is designed forthe use with handgrip
+ powering
modules K 3 N, K 3 U and K 30 AV.This microphone head features
an extremely high level of directionality. A elub-shaped characte-
ristics has been achieved by the interference principle. Due to its
high directionality the MKE 88 is highly suitable for those situations
where, for some reason or other, it is not possible to position the
mike elose to the sound source. The ME 88 is designed to pick up
largely direct sound and for this reason even at greater distances
environmental and indirect sound are reduced much more than
with microphones with cardioid characteristic. A fixed windscreen
effectively suppresses wind noise.
Polar Diagram
90'
250Hz..
500 Hz---
1000Hz-
180"
2000 Hz-
4000 Hz ---
8000 Hz -.......-.-..
4
Frequency Response
dB
50
40
}
J
30
20
10
0
20 200
1.000
2.000 5000 10.000 20000 Hz
500
sc
100
ME 88 + K3 N
Frequency response. . . . . .
Acoustical mode ot operation
Directional characteristic
Sensitivity at1000 Hz.
Output impedance . . . . .
Minimum load impedance
S/N to DIN 45405
and CCIR468-2 .
Connector . .
Plnconnections.
50.. .15000 Hz
interference transducer
cardioid I club
5 mV/Pa:!: 2.5dB
("' -66 dBV)
approx.130 Q (switch position I)
300 Q (switch position I)
Cable connector
> 65 dB
3-pin, DIN41524
1~ audlo, 2 ~ housingl
ground,
3 ~ audio to DIN45594
3-pin, DIN41524
(e.g. T3261001)
5.6 Vbattery powenng or
phantom powering to
DIN45596tor12. .48V,
seit adjusting
more than 600 hours
19/40 <f;x 688
approx. 1599
Satin nickel and aluminium
black anodized
Powersupply
1
}
Byttery operating time
Dimension in mm .
Weight.
Finish
We reservethe right to alterspecitications, in particular wlth regard to technlcal
improvements.
5