Filter
Top Products
26
Cleaning the radio microphone
Cleaning the radio microphone
̈ Use a cloth to clean the radio microphone from time to
time.
̈ Do not use any solvents or cleansing agents.
To clean the sound inlet basket of the microphone head
(MMD 835-1, MMD 845-1, MME 865-1):
̈ Unscrew the upper sound inlet basket from the micro-
phone head by turning it counterclockwise (see
diagram).
̈ Remove the foam insert.
̈ To clean the sound inlet basket:
– Use a cloth to clean the upper sound inlet basket from
the inside and outside.
OR
– Scrub with a brush and rinse with clear water.
̈ If necessary, clean the foam insert with a mild detergent
or replace the foam insert.
̈ Dry the upper sound inlet basket.
̈ Dry the foam insert.
̈ Reinsert the foam insert.
̈ Replace the sound inlet basket on the microphone head
and screw it tight.
You should also clean the contact rings of the microphone
head from time to time:
̈ Wipe the contact rings of the microphone head with a
cloth.
CAUTION! Liquids can damage the electronics of the
radio microphone!
Liquids entering the housing of the device
can cause a short-circuit and damage the
electronics.
̈ Keep all liquids away from the radio
microphone.
CAUTION! Liquids will damage the microphone module!
Liquids will damage the microphone module.
̈ Only clean the upper sound inlet basket.