Filter
Top Products
8
Putting the radio microphone into operation
Putting the radio microphone
into operation
Inserting the batteries/accupack
For powering the radio microphone, you can either use two
1.5 V AA size batteries or the rechargeable Sennheiser
BA 2015 accupack (see “Accessories and spare parts” on
page 30).
̈ Unscrew the lower part of the radio microphone from
the radio microphone’s body » by turning it counter-
clockwise.
̈ Slide back the lower part of the radio microphone as far
as it will go.
̈ Open the battery compartment cover Ƹ.
̈ Insert the batteries or the BA 2015 accupack as shown
on the battery compartment cover. Observe correct
polarity when inserting the batteries/accupack.
When unscrewing the radio microphone during
operation, the muting function is automatically
activated. “MUTE” appears on the display panel.
When screwing the lower part of the radio micro-
phone back to the radio microphone’s body, the
muting is canceled. “MUTE” disappears from the
display panel.
»
Ƹ