Shure 27A13709 Microphone User Manual


  Open as PDF
of 16
 
4
SPECIFICATIONS ACCESSORIES AND PARTS
Furnished Accessories
ShureLock™ Black Swivel Adapter A32M
Padded, Zippered Carrying Bag A27ZB
Optional Accessories
Windscreen A32WS
Popper Stopper™ PS-6
ShureLock™ Rubber Isolated Shock Mount A27SM
CERTIFICATION
EligibletobearCEMarking.ConformstoEuropeanEMCDirective2004/108/EC.
Meets Harmonized Standards EN55103-1:1996 and EN55103-2:1996, for residen-
tial (E1) and light industrial (E2) environments.
The Declaration of Conformity can be obtained from:
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Wannenacker Str. 28
D-74078Heilbronn,Germany
Phone:+49713172140
Fax:+497131721414
Email: EMEAsupport@shure.de
Type
Condenser (externally biased)
Frequency Response
20 to 20,000Hz
Polar Pattern
Supercardioid
Output Impedance
160Ω
Sensitivity
(at 1 kHz, open circuit
voltage)
−37dBV/Pa(14.1mV)
1Pascal=94dBSPL
Maximum SPL
(1 kHz at 1% THD)
1000 Ω load: 134dB(148dB,Padon)
2500 Ω load: 140dB(154dB,Padon)
THD of microphone preamplifier when applied input
signal is equivalent to cartridge output at specified
SPL
Signal-to-Noise Ratio
(referencedat94dB
SPL at 1 kHz)
86 dB
S/Nratioisdifferencebetween94dBSPLand
equivalent SPL of self noise, A-weighted
Dynamic Range
(at 1 kHz)
1000 Ω load: 126 dB
2500 Ω load: 132 dB
Common Mode
Rejection
(10 Hz to 100 kHz)
> 50 dB
Clipping Level
(20Hz-20 kHz at 1%
THD)
1000 Ω load: 2.0 dBV
2500 Ω load: 8.5 dBV
Self Noise
(typical, equivalent SPL,
A-weighted)
8.5 dB
Polarity
Positive pressure on diaphragm produces positive
voltage on pin 2 with respect to pin 3
Weight
Net: 428g(15oz.)
With Stand Mount: 537 g (18.9 oz.
Switch
Attenuator: 0,−15dB
Low Frequency Response: flat; -6 dB/octave below
115 Hz; -18 dB/octave below 80 Hz
Connector
Three-pin professional audio (XLR), male
Power Requirements
11 to 52 Vdc phantom, 6 mA
 previous next