Shure 27C687 Microphone User Manual


 
www.shure.com
©2012 Shure Incorporated
Asia, Pacific:
Shure Asia Limited
22/F, 625 King’s Road
North Point, Island East
Hong Kong
Phone: 852-2893-4290
Fax: 852-2893-4055
Email: info@shure.com.hk
United States, Canada, Latin
America, Caribbean:
Shure Incorporated
5800 West Touhy Avenue
Niles, IL 60714-4608 USA
Phone: 847-600-2000
Fax: 847-600-1212 (USA)
Fax: 847-600-6446
Email: info@shure.com
Europe, Middle East, Africa:
Shure Europe GmbH
Jakob-Dieffenbacher-Str. 12,
75031 Eppingen, Germany
Phone: 49-7262-92490
Fax: 49-7262-9249114
Email: info@shure.de
SPECIFICATIONS
Type
Dynamic
Frequency Response
60 to 11,000 Hz
Polar Pattern
Cardioid
Impedance
Dual. Microphone rating impedance is 150 ohms (260 ohms actual) for
connection to microphone inputs rated at 19 to 300 ohms and "High"
for connection to high-impedance microphone inputs. Switch is in high-
impedance position as supplied.
SENSITIVITY (at 1,000 Hz): LOW HlGH
Open Circuit Voltage* -57.5 dB -38.5 dB
(Ref. 1V/Pascal (1.3 mV) (12 mV)
*(1 Pa = 94 dB SPL)
Switch
Press-to-Talk Switch: lockable, for microphone and an external relay or
control circuit. Microphone circuit normally shorted in both high and low
impedance.
lmpedance Selection Switch: provides either high- or low-impedance
operation.
Cartridge Shock Mount
lnternal rubber vibration-isolator
Cable
2.1 m (7 ft) four-conductor, two conductors shielded non-detachable
Case
Two-tone gray ARMO-DUR‚ with dull-chrome-plated steel screen
Net Weight
736 grams (1 Ib 10 oz)
Shipping Weight
1020 grams (2 Ib 4 oz)
REPLACEMENT PARTS
Cable ......................................C31C
On-Off Switch ..............................K141S
For additional service or parts information, please contact
Shure's Service department at 1-800-516-2525. Outside
the United States, please contact your authorized Shure
Service Center.