Shure 55SH SERIES II Microphone User Manual


  Open as PDF
of 2
 
GENERAL
The Model 55SH Series II provides the Shure classic
UNlDYNE
II design coupled with modern acoustic compo-
nents to meet today’s performance standards. This micro-
phone is excellent for vocal pickup with its characteristic
Shure presence peak.
The 55SH Series II has a cardioid (unidirectional) polar
pickup pattern that minimizes sound pickup from the rear of
the microphone. This allows the Model 55SH Series II to be
used in close proximity to loudspeakers without creating
feedback problems, and it can perform under adverse
acoustic conditions where omnidirectional microphones
cannot.
The 55SH Series II has a low-impedance balanced out-
put designed for connection to microphone inputs rated at 75
to 300 ohms. The microphone features a cartridge shock
mount to reduce stand noise, an On/Off switch, and an at-
tached, self-tensioning,
5
/
8
”–27 thread swivel mount.
This microphone is ideal for public address or theater–
stage sound systems, as well as for broadcasting, recording,
and other sound applications where a stand-mounted micro-
phone with a classic look is desirable.
Features
•
Classic appearance, modern performance
•
Frequency response tailored for speech, vocals and in-
strumental music
•
Cardioid directional pattern for optimum performance in
adverse acoustic environments
•
Shock–mounted cartridge minimizes stand-transmitted
noise, ensures quiet operation
•
Rugged die cast case and mechanical design for reli-
ability under rigorous conditions
•
Self-tensioning swivel mount, permits tilting through 45
_
forward and 80
_
backward
SPECIFICATIONS
Type
Dynamic
Frequency Response
50 to 15,000 Hz (See Figure 1)
20 200001000 1000050 100
98765432
98765432
+10
0
–10
Hz
dB
TYPICAL FREQUENCY RESPONSE
FIGURE 1
Polar Pattern
Cardioid (unidirectional), uniform with frequency, sym-
metrical about axis (see Figure 2)
TYPICAL POLAR PATTERNS
FIGURE 2
Shure Brothers Incorporated
222 Hartrey Avenue
Evanston IL 60202-3696 U.S.A.
Model 55SH Series II User Guide
27A2465 (SB)
E1998, Shure Brothers Incorporated
Printed in U.S.A.
This microphone design is a registered trademark of
Shure Brothers Incorporated.