Filter
Top Products
2
SPECIFICATIONS
Type
Dynamic
Frequency Response
40 to 10,000 Hz (See Figure 2)
TYPICAL FREQUENCY RESPONSE
FIGURE 2
Polar Pattern
Omnidirectional
Impedance
Rated at 150 Ohms (200 Ohms actual). Designed for
connection to inputs rated at 19 to 300 Ohms.
Output Level (at 1,000 Hz)
Open Circuit Voltage . . . . . . –57.5 dBV/Pa (1.33 mV)
(1 Pa = 94 dB SPL)
Polarity
Positive pressure on diaphragm produces positive voltage on
the white cable lead relative to the blacklead.
Cable
1.2 m (4 ft.) two-conductor, shielded, unterminated
Stand Thread
Suitable for mounting on stand or gooseneck with 5/8”–27
thread.
Case
Silver and black aluminum with stainless steel grille
Dimensions
See Figure 3
OVERALL DIMENSIONS
FIGURE 3
Net Weight
142 grams (5 oz.)
Packaged Weight
255 grams (9 oz.)
Certification
Conforms to European Union directives, eligible to bear CE
marking; meets European Union EMC Immunity Requirements
(EN 50 082-1, 1992).
FURNISHED ACCESSORIES
Allen wrench (No. 4)......................................................... 80A67
OPTIONAL ACCESSORIES
Gooseneck, 45.7 cm (18 in.) ................................................G18
Gooseneck, 45.7 cm (18 in.), Side Vent ........................... G18A
Gooseneck, 30.5 cm (12 in.) ................................................G12
Gooseneck, 15.25 cm (6 in.), Side Vent ............................. G6A
Mounting Flange................................................................... A12
Heavy-Duty Mounting Flange..........................................A13HD
REPLACEMENT PARTS
Cartridge...............................................................................R50
Screen and Grille Assembly ............................................RK85G
For additional service or parts information, please contact the
Shure Service Department at 1-800-516-2525. Outside the United
States, please contact your authorized Shure Service Center.
ARCHITECTS' SPECIFICATION
The microphone shall be a moving coil (dynamic) type with a
frequency response of 40 to 10,000 Hz. It shall have an
omnidirectional polar characteristic and a low impedance rated at
150 Ohms for connection to inputs rated 19 to 300 Ohms. The
microphone output level shall be –57.5 dBV/Pa. It shall be
equipped with a non-detachable 1.2 m (4 ft.) cable. The
microphone shall be threaded for mounting on a stand or
gooseneck with a 5/8"–27 thread. The overall dimensions of the
microphone shall be 67.1 mm (2–21/32 in.) in length and 34.5 mm
(1–3/8 in.) in diameter. The microphone shall be the Shure Model
561 or equivalent.
20 200001000 1000050 100
98765432
98765432
+10
0
–10
Hz
Bd
67.1 mm
(2–21/32 in.)
34.5 mm DIA.
(1–3/8 in.)
5/8 in.–27 thread
Nameplate
#4–40 Allen setscrews
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055