Filter
Top Products
English – 5
Low Frequency Response Switch
Flat, –6 dB/octave below 115 Hz, –18 dB/octave below 80 Hz
Power
Phantom Power 48 Vdc " 4 Vdc (IEC-268-15/DIN 45 596),. . . . . . . . . . . . . . . .
positive pins 2 and 3
Current Drain 4.65 mA typical at 48 Vdc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Common Mode Rejection Ratio (CMRR)
50 dB, 20 Hz to 20 kHz
Connector
Gold plated, three-pin (XLR) professional audio
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Dimensions
55.9 mm (2.20 in.) maximum body diameter, 187 mm (7.37 in.) long.
Net Weight
490 grams (17.3 oz)
*THD of the microphone preamplifier when applied input signal is equivalent to the
cartridge output at specified SPL.
**S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-
weighted.
CERTIFICATION
Eligible to bear CE Marking. Conforms to European EMC Directive
89/336/EEC. Meets applicable tests and performance criteria in European
Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial
(E2) environments.
FURNISHED ACCESSORIES
ShureLockt Elastic Shock Mount (SL model only) A32SM. . . . . . . . . . . . . .
ShureLockt Swivel Adapter A32M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aluminum Carrying Case (SL model only) A32SC. . . . . . . . . . . . . . . . . . . . .
Padded, Zippered Carrying Bag (CG model only) A32ZB. . . . . . . . . . . . . . . .
Protective Velveteen Pouch (SL model only) A32VB. . . . . . . . . . . . . . . . . . . .
REPLACEMENT PARTS
Suspension Shock Mount Elastic Cords (set of two) RK373. . . . . . . . . . . . . .
SERVICE
For additional microphone service or parts information, please contact
Shure’s Service department at 1-800-516-2525. Outside the United States,
please contact your Authorized Shure Service Center.