Filter
Top Products
6
Suspension Mount
Use the supplied ShureLock
®
rubber suspension mount to
secure the microphone to a floor or boom stand.
Important: Thread the knurled locking ring securely to the
base of the microphone. Do not overtighten.
Power Requirements
This microphone requires phantom power and performs best with a 48 Vdc supply (IEC-268-15/DIN 45 596).
However, it will operate with slightly decreased headroom and sensitivity with supplies as low as 11 Vdc.
Most modern mixers provide phantom power. You must use a balanced microphone cable: XLR-to-XLR or
XLR-to-TRS.
OPERATION
Positioning
Position the front of the microphone, with , towards the desired sound source. Position the rear of
the microphone, with the vintage circle S logo, towards any unwanted sound sources.