Filter
Top Products
5
Cartridge Type Electret Condenser
Polar Pattern Cardioid, Supercardioid (selectable)
Frequency Response
50 to 20,000 Hz
Output Impedance
150 Ω
Sensitivity
open circuit voltage, @ 1 kHz, typical
–51 dBV/Pa
[1]
(2 8 mV)
Maximum SPL
1 kHz at 1% THD
[ ]
2500 Ω load: 152 dB
1000 Ω load: 152 dB
Signal-to-Noise Ratio
[3]
72 dB
Dynamic Range
@ 1 kHz
2500 Ω load:
130 dB
1000 Ω load: 130 dB
Clipping Level
20 Hz to 20 kHz, 1% THD
2500 Ω load: 6.7 dBV
1000 Ω load: 6 dBV
Self Noise
equivalent SPL, A-weighted, typical
22 dB SPL-A
Common Mode Rejection
10 to 100,000 kHz
≥60 dB
Connector Three-pin professional audio (XLR), male,
balanced
Polarity Positive pressure on diaphragm produces
positive voltage on pin 2 with respect
to pin 3
Power Requirements
11–52 V DC
[4]
phantom power
(IEC-61938)
5.2 mA, maximum
Net Weight
300 g (10.6 oz.)
[1]
1 Pa=94 dB SPL
[2]
THD of microphone preamplifier when applied input signal level is equivalent to car-
tridge output at specified SPL
[3]
S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise,
A-weighted
[4]
All specifications measured with a 48 Vdc phantom power supply. The microphone
operates at lower voltages, but with slightly decreased headroom and sensitivity.
7 5 in
191 mm
1 918 in
49 mm
Specifications