Filter
Top Products
5
DIP SWITCHES
The rear-panel DIP switch provides the following setup options. The posi-
tions shown in bold type are the factory settings.
NOTE: Switch positions and effects are shown in Figure 3 and also on the
mixer label.
MODIFIABLE FUNCTION SWITCHES
FIGURE 3
DIP SWITCH SW702 FUNCTIONS
Manual/Auto: Automatic activation is defeated in the Manual position. In
Manual mode, functions as a standard 8x1 mixer.
Last Mic Lock-On: Last Mic Lock-On feature keeps the most recently ac-
tivated microphone turned on until a newly activated microphone takes its
place. When defeated, microphones turn off after their preset hold time.
Hold Time: Adjusts the time an activated microphone (which is not locked
on) remains on after the talker stops talking. Settings are 0.4 seconds or
1.0 second.
Off-Attenuation: Changes the off-attenuation level from 15 dB to infinity
(∞). With the 15 dB setting, an unused microphone is 15 dB lower in level
than when it is activated. With the ∞ setting, an unused microphone is com-
pletely off.
Limiter Threshold: Changes the output limiter threshold. Settings are
OFF (factory setting), +16 dBm, +8 dBm, or +4 dBm (see Internal Modifica-
tions for other threshold settings).
Link Global/Local: Determines whether each linked SCM810 output con-
tains only its own program output, or that of all linked mixers (see Mixer
Linking for more information).
1 2 3 4 5 6 7
(MIXER
REAR
PANEL)
DIP
SWITCH
SW702
Switch
Function
Manual/Auto
Last Mic
Lock-On
Hold Time
Off-Attenuation
Level
Limiter
Threshold
Link
Local/Global
Switch Position
Number→
1 2 3 4 5,6 7
Switch Up Auto On 0.4 second 15 dB
5 Up
= Limiter off
6 Up
5 Down
= +8 dBm
6 Up
5 Up
= +16 dBm
6 Down
5 Down
= +4 dBm
6 Down
Global
Switch Down Manual All mics off after
hold time
1.0 second
∞ (completely off)
Local