Filter
Top Products
Hum Sensitivity (maximum)
13 dB equivalent SPL/millioersted
(1 mV/10 oersted)
Switches
Bass
Rollof
f and Mid-Range Emphasis: Slotted
response
selector switches. See Figure 1 for bass rolloff and
mid-range emphasis (presence boost) response. See
Figure 3 for location of switches.
Response Selector Switch Cover
Cover
plate (supplied) can be used to prevent accidental
change of response setting.
Cartridge Shock Mount
Internal air-suspension shock- and vibration- isolator
Microphone Connector
Three-pin professional audio connector designed to
mate
with Cannon XL series, Switchcraft A3 (Q-G)
series
or equivalent connector.
Swivel Assembly
Integral part of microphone with captive nut for ease of
attachment
to stand, suitable for mounting on stand with
5
/
8
in–27 thread.
Case
Dark gray enamel aluminum and steel case with dark
gray foam windscreen
Dimensions
See Figure 3
OVERALL DIMENSIONS
FIGURE 3
Net Weight
764 grams (1 lb, 11 oz)
INTERNAL CONNECTIONS
FIGURE 4
FURNISHED ACCESSORY
Switch Cover Plate
53A1884
.
. . . . . . . . . . . . . . . . . . . . . .
OPTIONAL ACCESSORIES
DeskStand S37A, S39A
.
. . . . . . . . . . . . . . . . . . . . . . . . . .
Cable
and Plug Assembly (7.6m – 25 ft)
C20F.
. . . . .
For additional service or parts information, please
contact Shure’s Service department at 1-800-516-2525.
Outside the United States, please contact your authorized
Shure Service Center.
ARCHITECTS’ SPECIFICATIONS
The microphone shall be a moving coil (dynamic) type
with
a frequency response of 40 to 16,000 Hz. The unit
shall
have
a cardioid polar characteristic. The
cancellation at the
sides shall be approximately 6 dB and the cancellation at
the
rear shall be 15 to 20 dB. The microphone shall be low
impedance with a rated impedance of 150 ohms for
connection to microphone inputs rated at 19 to 300 ohms.
The microphone output shall be –57.0 dB where 0 dB = 1
milliwatt per 10 microbars.
The microphone shall have two switches for controlling
the frequency response. The first switch is a Bass Rolloff
selector switch. One position of this switch provides a flat
low frequency response and the second position provides
a gradual–low frequency rolloff. The second switch is the
Mid–Range Emphasis (presence boost) switch. One posi-
tion of this switch provides a flat mid–range frequency
response and the second position raises the level of the
mid–range frequency response. The microphone shall be
equipped with an integral swivel assembly suitable for
mounting on a stand with a
5
/
8
in–27 thread.
The overall dimensions shall be 191 mm (7–
17
/
32
in.) in
length,
148 mm (5–
13
/
16
in.) in height, and
96 mm (3–
25
/
32
in.) in width.
The microphone shall be the Shure Model SM7 or
equivalent.
The
Sound of Professionals...W
orldwidet
Shure Brothers Incorporated
222 Hartrey A
venue, Evanston IL 60202-3696