Shure wl185 Microphone User Manual


 
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
Models WL93, WL93T, WL93-6, WL93-6T
GENERAL
Model WL93 Microphones are omnidirectional, subminiature, lava-
lier electret condenser microphones designed for use in TV broadcast-
ing, theater, and sound reinforcement applications where a visually
unobtrusive microphone is desirable.
All WL93 models are supplied with a mounting block with attached
tie bar, a sew-on mounting bracket, and an acoustic windscreen to min-
imize wind noise in outdoor applications. All WL93 models include a 1.2
m (4 ft.) cable terminated with a miniature 4-pin connector (TA4F type)
which connects directly to a Shure wireless body-pack transmitter.
VARIATIONS
WL93:
Black finish; includes 1.2 m (4 ft.) cable
WL93T:
Tan finish; includes 1.2 m (4 ft.) cable
WL93-6:
Black finish; includes 1.9 m (6 ft.) cable
WL93-6T:
Tan finish; includes 1.9 m (6 ft.) cable
INSTALLATION
1. To mount a WL93 to the tie clip, snap the microphone into the
mounting bracket and attach the clip to an article of clothing.
2. To install the foam windscreen, slip the it over the top of the micro-
phone. The foam windscreen provides 5 to 10 dB of pop protec-
tion.
REPLACEMENT PARTS AND ACCESSORIES
Windscreen, Charcoal Gray.................................RK355WS
Tie Clip, Black (2 each).........................................RK354SB
Tan Windscreen ...................................................... RK304T
Double Tie Clip..................................................... RK307DB
Tan Tie Clip Assembly............................................90B4327
Black Sew-on Mounting Bracket............................65B1733
Tan Sew-on Mounting Bracket.............................65B1733A
Zippered Carrying Bag...............................................26A13
SPECIFICATIONS
Type: Condenser (electret bias)
Frequency Response: 50 to 20,000 Hz
Polar Pattern: Omnidirectional, uniform with frequency
Output Impedance: 3000
Ω
Sensitivity: -38 dBV/Pa (1 Pa = 94 dB SPL)
Maximum Sound Pressure Level: 120 dB SPL
Dynamic Range: 102 dB
Output Noise (A-weighted): 18 dB SPL
Polarity: Positive pressure on microphone diaphragm produces posi-
tive voltage on pin 3 with respect to pin 1 (ground)
Power Requirements: Regulated nominal +5 Vdc (2 Vdc to 10 Vdc)
source provided at microphone connector pin 2 relative to pin 1 of a
Shure wireless body-pack transmitter.
WL93 MOUNTING
TIE CLIP
FOAM WINDSCREEN
500 1,000 2,000 5,000 10,000 20,00050 100 20020
0
+10
–10
WL93 FREQUENCY RESPONSE
FREQUENCY IN Hz
RELATIVE RESPONSE IN dB