Sony SRP-X500P Music Mixer User Manual


 
16
Installation
Releasing the buttons automatically cancels the group
and channel selection mode, and the currently
displayed group is selected.
Refer to “Wireless Microphone System Frequency
List” supplied with the WRU-806.
3
Press and hold down the CH button, and press the + or
– button in 3 seconds to select a channel.
Similer to step 2, each time you press the + or –
button, the CH indication changes in the order shown
in the group and reception channel list.
Refer to “Wireless Microphone System Frequency
List” supplied with the WRU-806.
If you press the + button when the last channel of the
selected group is displayed, the first channel of the
group will be displayed.
Selecting the reception channel by frequency
Press the + button.
This changes the GP/CH indication to a frequency
indication.
To change a frequency, press the + or – button while
keeping the CH button pressed. (A higher or lower
frequency will be displayed.)
Press the + button again to change the frequency
indication to a GP/CH indication.
4
If the desired channel or frequency is displayed,
release the CH button and + or – button.
The selected channel is set.
To store the selected group and channel
Leave the indication unchanged for 1 second.
The group and channel set in the procedure explained
above are stored in memory.
Display example of WRU-806B (CE62 model)
GP CH GP CH
Display example of WRU-806B (CE62 model)