Filter
Top Products
6
Overview
Overview
Features
The SRP-X500P is a versatile powered mixer which
incorporates an audio mixer, RGB/video switcher,
processor, and power amplifier into a 3U-rack-size unit.
9 preset AV system type settings
By setting the SYSTEM TYPE selector, the SRP-X500P
supports various AV system comfigurations.
Projector control
The PROJECTOR CONTROL RS-232C connector or the
CONTROL S IN/OUT connectors can be used to change
the power status of a Sony projector or plasma display to
on or to standby, and to select the input signal.
Built-in digital mixer
The digital mixer features A/D and D/A converters with a
24-bit/48-kHz sampling rate and a high-performance DSP.
In addition to regular audio mixer features, the SRP-
X500P offers such digitally enabled functions as a
feedback reducer comprising an independent channel and
automatic gain control (AGC).
Various audio input/output connectors
Four microphone inputs and two stereo line inputs can be
freely assigned to four output systems.
Compatibility with composite/RGB/
component signals
The SRP-X500P is equipped with three composite inputs
and two RGB/component inputs. These inputs eliminate
the need for a separate RGB switcher or video switcher,
resulting in a simplified system configuration. The SRP-
X500P supports high-resolution component signals such
as 480p and 1080i, and also SXGA (1280 × 1024 pixels)
for RGB.
Built-in digital amplifiers
90 W + 90 W + 50 W + 50 W (8Ω or 4Ω) power amplifiers
are incorporated. The SRP-X500P also supports 60 W
high-impedance speakers (70 V LINE, 82Ω).
Remote connectors for external devices
• RS-232C connectors
The REMOTE RS-232C connector allows the use of an
external personal computer or system controller to
control the SRP-X500P.
• REMOTE PARALLEL connector
Input signal selection, volume control and scene control
of the SRP-X500P can be performed via the input pins.
Through the output pins, remote control of the
environmental equipment such as a screen and lighting
equipment, and the status display of the SRP-X500P can
be carried out.
Installation of up to two tuner units
To enable the use of wireless microphones, the tuner slots
of the SRP-X500P allow the installation of up to two
WRU-806 units (not supplied) or the URX-M1 Tuner
Units that come with the UWP-X1/X2 (not supplied).
Rack mounting
The SRP-X500P can be mounted into an EIA-standard 19-
inch rack (with a 3U-height).
Setting up the SRP-X500P using the
supplied program
The CD-ROM that comes with the SRP-X500P contains
the SRP-X500P Manager program for setting the
parameters including AGC (automatic gain control),
routing, and equalizer to allow you fine parameter settings.
The SRP-X500P manuals
The two following manuals are supplied with the SRP-
X500P:
• Operating Instructions (provided on the supplied CD-
ROM)
• User’s Guide (provided on the supplied CD-ROM)
The Operating Instructions mainly describe SRP-X500P
operations. The User’s Guide explains how to set the
parameters using the program “SRP-X500P Manager”
supplied on the CD-ROM.
Using the supplied CD-ROM
The CD-ROM contains the following files.
SRP-X500P Manager
This is a program for setting the SRP-X500P parameters
from a PC.
SRP-X500P Manager User’s Guide
This is a PDF file containing information on the functions
and operations of the SRP-X500P Manager. Can be
viewed on a PC.