Filter
Top Products
51
Tuner Settings
on the supplied CD-ROM (for U30,
U42, CE62, and CE67 models) or in
the supplied leaflet “Sony Wireless
Microphone System Frequency List”
(for AU66 and E models).
Pressing the – button cycles the
indications in the opposite direction.
Hold down the + or – button to change
the channel group faster.
4 When the desired channel group
number appears, press the SET button.
The selected group is entered.
The right four digits start to flash to
allow the selection of the channel
number.
5 Press the + or – button to select the
channel number.
The channel indication changes in the
order shown in the tables in the pdf
files “Sony Wireless Microphone
System Frequency List” on the
supplied CD-ROM (for U30, U42,
CE62, and CE67 models) or in the
supplied leaflet “Sony Wireless
Microphone System Frequency List”
(for AU66 and E models).
6 When the desired channel number
appears, leave the tuner for about 10
seconds or press down the SET button
for more than one second.
The selected channel number stops
flashing and the selection is stored in
memory.
To select the channel by
frequency indication
1 Press the SET button for more than one
second.
Keep pressing the SET button until the
display section parameters start to
flash.
2 Press the SET button repeatedly until
the frequency indication appears and
starts flashing.
3 Press the + or – button to select the
frequency.
Example: When the channel group 00 is
selected