Filter
Top Products
Nucleus User Guide Page 27
D
AW Protocol Commands
T
o assign a HUI or MCU protocol function to a switch, select the relevant Soft Key Set in the Remote’s DAW tab
a
nd click on the on-screen key that you wish to assign. The key will go yellow to indicate that it is being edited.
F
rom the drop-down menu which appears, selecting DAW CMDS produces a second drop-down which lists all of
t
he functions and commands available to you within the selected Profile.
Note that the list shown below is for Pro Tools. See the Appendix for a full list of the commands available
for each supported DAW.
Select the required command from the list, and its name will appear in the appropriate part of the Browser’s soft key display.
Soft key assignments must be saved before they become active on Nucleus. If there are any unsaved changes when you try
to exit the current Soft Key Set, a pop-up will appear inviting you to save your changes before exiting. Click No to exit without
saving your changes, or Yes to save changes and return to the Default soft key set.