Filter
Top Products
10 TASCAM US-144MKII
Front panel
e
MIC IN (L, R) jacks
(XLR balanced)
These are analog mic input jacks. The wiring
is as follows: pin 1 = ground, pin 2 = hot, pin
3 = cold.
r
LINE IN L jack
(TRS 1/4” phone jack)
These are balanced line input jacks.
t
PHONES jack
(stereo 1/4” phone) This
is a headphone output jack.
CAUTION
Use the PHONES knob to minimize the
volume before connecting headphones.
Failure to do so could cause a sudden burst
of loud noise, which might result in hearing
damage, for example.
y
LINE IN R/GUITAR IN jack
(TRS 1/4”
phone jacks) These are balanced line input
jacks. This also accommodates guitar input.
If the top panel
MIC/LINE
-
GUITAR
select
switch is in the
GUITAR
position, this
operates as an unbalanced input jack for
guitar. If the
MIC/LINE-GUITAR
select switch
is in the
MIC/LINE
position, this operates as
a balanced input jack. (Sleeve = ground, tip
= hot, ring = cold)
2 – Parts of the US-144MKII