Filter
Top Products
5
Connections
1 - Power
The Nova Reverb require 12V DC 300 mA. Use the
power supply provided in the product box or a power
supply with similar specifications.
2 - Inputs
1/4” mono jack connections for signal input. Use left
input for mono signal or use both left and right inputs
for connecting a stereo signal.
3 - Outputs
1/4” mono jack connections for signal output. Use left
output for mono or both outputs for stereo.
Switches
Nova Reverb holds two modes. Preset mode and
Manual mode.
4 - Manual switch
Press to go to manual mode. Manual mode can be
accessed either from bypass state or from preset
mode. Manual mode is “What You See Is What You
Get”-mode. This means that the Nova Reverb will
process exactly according to the current position of the
controls.
5 - Preset switch
Press to go to preset mode. Preset mode can be
accessed either from bypass state or from manual
mode. In preset mode all LEDs will indicate the current
settings, but the 5 knobs may not be positioned
according to the stored values.
As soon as you change the position of a knob the
parameter value is updated according to the position.
Preset S
tore function:
The current settings can be stored from either preset
or manual mode. It is easy:
- Press and hold the PRESET button for approx. one
second. The preset is now stored.
Note that when storing a preset from manual mode, all
parameters are stored according to the position of the
OVERVIEW