The Singing Machine SMI-1420 Electronic Keyboard User Manual


 
OPERATION
E06
PlaytheKeyboard
[1] To turn on the keyboard, set the POWER to ON. The display will illuminate.
To save power while unit is not in use, it will notify you with bell sound every 5 minutes.
Adjust the volume to the desired level. Repeatedly press volume up or volume down to
increase or decrease the volume. The keyboard's volume ranges from 0 (no sound) to 10
(maximum), and the current volume level appears on the display.
Note:
[2]
Youcanlistentoanyofthe50songslistedontherightsideofthepanel.
[1] SONG
Note:
[2]
-+
[3] START/STOP
[4] TEMPO UP TEMPO DOWN
[5] START/STOP
Press . The display appears SONG along with the number of the current song.
The keyboard pre-selects the tune “Canon” (No. 01) each time the powered ON.
Choose a song from the SONGS list and enter its two-digit number on the keypad, or,
press “ ” to move to the lower or higher numbered song.
Press to start playing the song.
A “score” to display the notes that are playing is located in the center of the display.
A “keyboard” is displayed fingering and which keys are pressed (bottom of the display)
The black dots next to the song number display the beat count in the measure.
The musical chord is displayed at the left corner of the display.
To change the tempo, repeatedly press or . The current
tempo setting appears.
To select a different song, repeat step 2. To stop, press .
To play a demo song one by one (in order from the selected starting point), press
.Tostopthedemo,press again.DEMO DEMO
PlayingtheDemoSong
UsingDemo
ENGLISH