Filter
Top Products
4
6
HOW TO REMOVE THE TOP PANEL
1
Remove all fader knobs and the 4screws which
fix the top panel.(see fig.A)
2
Remove the top panel.
HOW TO CHANGE THE FADER UNIT
1
Remove the screws on the fader panel.(see fig.B)
2
Remove the fader unit from position in mixer.
3
Carefully remove the multi-cable connector from
fader unit.(see fig.C)
4
Attach multi-cable connector to new fader unit.
5
Position the fader unit carefully and secure with
screws.
You can replace the CFunit with "CF-RUS",
"CF-R" or "CF-PCV".
HOW TO REPLACE THE CF UNIT WITH "CF-PCV"
When the fader unit is replaced, please see fig.C.
Place the fader unit in the proper position and fix it
with two screws.(fig.D-
b
)
How to change the fader unit.
driver
driver
fig.D
CF-RUS or CF-R
CF-PCV
fig.A
fig.C
fig.B
Remove the multi-cable
connector from fader unit.
Remove four scews.
CAUTION
There is a swith for "CF-PCV" unit. When "CF-
PCV" unit is installed, set the switch to "PCV"
mode.
CAUTION
When the fader unit is replaced, do not loosen
the screws with marking.