Filter
Top Products
CONGRATULATIONS
Thank you for purchasing the VESTAX PMC
-
270A Professional Mixing Controller As The
top of the line, the PMC-270A is a high specification mixer designed to meet the most
professional requirements of the Dance Music DJs.
Please read this owner's manual carefully before you start to use your mixer, so that you will
fully understand all of the special features and enjoy the full use of the product.
FEATURES
Three band isolator switch kills each frequency range completely in quick action.
Pre / Post selectable AUX send switch enables various effect processing. The effect signal can be controlled by
a dedicated return level control knob, the signal can be also monitored by headphone when "return" is selected
by cue button.
The new option meter allows DJs to monitor the cue signal visually. The tempo can be matched by eyes as well
as ears.
Three phono and 6 line inputs are provided to meet the new mixing style with various input source.
User replaceable 60 m/m input faders and 45 m/m cross fader make "on sight service" very easy. Optional
input rotary volume can be replaced with the fader for "House" application.
Line 4 input jack (RCA) is located on the top panel. This allows DJs to use hand carried DAT or MD player
mixing with installed equipment.
IMPORTANT
To prevent electric shock, do not remove the cover. No user
serviceable parts inside. Please refer servicing to a VESTAX
Authorized Service Center. Always disconnect all equipment
from the main supply when disconnecting or reconnecting
signal leads. The power cord should be connected last. Make
sure that the power switch is off when connecting the power
cord. Disconnect from AC supply when equipment is not used
for extended amount of time.
WARRANTY
The warranty might vary from country to country. Each
distributor has their own warranty system in accordance with
the country or state regulations or laws. VESTAX observes the
manufacturing country s regulations.
PRECAUTIONS
Humidity and dust
Avoid use where there is high humidity and dust which may
cause damage to internal parts.
Temperature
Avoid use in hot, (over 35 )and cold, (below 5 )
locations. Keep the unit away from extreme direct heat such
as direct sunlight, heating radiators, or closed vehicles.
Power cord handling
Connecting the power cord to other cords or joining cords
together can cause fire and electric shock. This is extremely
dangerous.
Take precaution when handling AC plugs and connectors.
Handle only the plug or connector and do not perform these
operations with wet hands.
Keep away from liquids
Do not stand cans containing liquids on or near the
equipment. If liquid enters equipment, disconnect the power
cord from the power outlet immediately.