Filter
Top Products
13
Function LED Behavior Description
DTS
TruSurround
On/O
Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), all
inputs will produce virtual surround sound. When disabled (O), virtual surround
sound is disabled.
Treble
Levels
Press the TREBLE button then press the Next/Previous button to increase/decrease
the treble level. The LED indicators will move to the top with increasing levels and to
the bottom with decreasing levels.
Bass
Levels
Press the BASS button then press the Next/Previous button to increase/decrease the
bass level. The LED indicators will move to the top with increasing levels and to the
bottom with decreasing levels.
Center
Levels
Press the CENTER button then press the Next/Previous button to increase/decrease
the center level. The LED indicators will move to the top with increasing levels and to
the bottom with decreasing levels.
When a Dolby
Digital / DTS signal
is detected.
Dolby Digital and DTS are only available on either the Coaxial In or Digital Optical
Audio In inputs.
When a Dolby Digital or DTS signal is detected, the Dolby Digital (White) / DTS (Orange)
indicator LED will light up for 3 seconds before fading.
Two center LEDs indicate
Treble level 0.
Two center LEDs indicate
Bass level 0.
Dolby Digital / DTS
Indicator LED
TruSurround On
TruSurround O
Two center LEDs indicate
Center level 0.