Filter
Top Products
12
The player does not turn on.
The player is playing a disc but no sound is com-
ing out of the speakers.
There is no difference in sound when I adjust the
HIGH END and BOTTOM control.
The volume levels of my media are not steady
and the AVC does not seem to be working.
Make sure the power cord is plugged into a socket
that works or a power-strip/surge protector that
is turned on.
Make sure the AVC-800 is turned ON. (When the
power is on, the green POWER LED is lit.)
Make sure the LEVEL ADJ control on the rear
panel of the AVC-800 is not turned completely
down.
Make sure all cables are firmly attached to the
AVC-800, the player’s output and the reciever’s
input.
Make sure none of the cables are damaged. (Try
using a different RCA cable/cables.)
Make sure the SONIC ENHANCER mode is acti-
vated. (The SONIC ENHANCER or AVC+SONIC
ENHANCER LED is lit.) Use the SELECTOR button
to toggle between the modes.
Make sure BYPASS mode is not activated.
Make sure the AVC mode is activated. (The AVC
or AVC+SONIC ENHANCER LED is lit.) Use the
SELECTOR button to toggle between modes.
Make sure BYPASS mode is not activated.
Troubleshooting