Whirlwind SPC82L Microphone User Manual


 
A set of dipswitches is provided for each ISO output for lifting the ground connection between the input and
output. Normally the switch is left in the “GND” position unless there is a problem with hum or buzz. Then
moving to the “LIFT” position may help reduce or eliminate the problem.
Rear tie-bar is provided for attaching cables securely to avoid accidental disconnects.
DCSP1 (Replaces PS48)
PHANTOM POWER SUPPLY
The DCSP1 is a regulated low-noise 48VDC power supply that can deliver up to 500mA. (Approximately 48
channels of microphones at 10mA each.)
WARRANTY
This product is guaranteed to be free of defects in materials and workmanship for a period of 3 years from
the date of purchase to the original purchaser. Should warranty service be required, return the unit postage
paid along with the original sales receipt to Whirlwind - 99 Ling Road - Rochester NY 14612.
Whirlwind will, at its option, repair or replace the unit and return it to you.
This warranty does not cover damage resulting from abuse, unauthorized modifications or use of the
product in unintended applications.